through rough waters
Scotch-Brite™ EX3 Deburring Wheel, X3-WL, 9S Fine, 12 in x 1 in x 5 in, 1 ea/Case
$156.70 / Each
| SKU | 7100024065 |
|---|---|
| Legacy SKU | 61500159886 |
| UPC | 00048011930435 |
| Product Number | X3-WL |
Scotch-Brite EX3 Deburring Wheel is a convolute-constructed, hard, durable deburring wheel suited for applications where edge retention is a must. The wheel performs best when consistently presented with a sharp edge or metal burrs. A unique resin system resists smearing and heat buildup.
- Highest edge retention and durability in the Scotch-Brite™ Deburring Wheel line provides aggressive edge deburring
- Specially engineered to condition sharp edges and metal burrs
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Non-woven web runs cool and lessens impact on heat-sensitive materials
- Unique resin system produces less smearing, reducing clean and prep time
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Center Hole Diameter | 5 in | 127.0 mm |
Shipping Dimensions |
|
| Weight | 3.50094 lb |
|---|---|
| Length | 12.48031 in |
| Width | 12.48031 in |
| Height | 1.65354 in |
| Color | Gray |
|---|---|
| Maximum Speed | 3,000 rpm |
PRODUCT FAQ
-
What is the Scotch-Brite™ EX3 Deburring Wheel, X3-WL?
The Scotch-Brite™ EX3 Deburring Wheel, X3-WL is a high-performance deburring wheel designed for consistent edge conditioning and effective burr removal.
-
What are the dimensions of this deburring wheel?
The dimensions of this deburring wheel are 12 inches in diameter, 1 inch wide and 5 inches arbor hole diameter.
-
How many pieces come in one case of the product?
One case contains one unit/piece of Scotch-Brite™ EX3 Deburring Wheel, X3-WL.
-
Is it safe to use on different types of metals such as stainless steel or aluminum?
Yes! This deburrer can be used safely on various metal surfaces including stainless steel or aluminium without causing any damage whatsoever.
-
The package says '9S Fine', what does that mean?
"9S Fine" refers to grade number assigned to determine the coarseness level (fine means more fine). It designates the degree at which scotch-brite abrasive materials scored with an alphanumerical system based upon its mechanical particle size.(higher numbers=fine particles)
Scotch-Brite™ EX3 Deburring Wheel is an effective tool for deburring, blending, finishing, and polishing edges on various materials such as glass, hard and soft composites, and metals including builder's hardware, medical instruments, metal fabrication, metal implants, plumbing fixtures, and turbine engines. However, it is not recommended for applications where conformability and finishing of flat surfaces are required due to its hard density.
The EX3 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. On the other hand, aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
- Effective for deburring, blending, finishing, and polishing edges on various materials
- Available with silicon carbide or aluminum oxide abrasive mineral
- Silicon carbide produces a finer finish while aluminum oxide provides high cut-rate and long life
- Scotch-Brite™ industrial abrasives incorporate abrasives into non-woven nylon or synthetic fibers for consistent results
- The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers