through rough waters
Scotch-Brite™ EX3 Deburring Wheel, X3-WL, 9S Fine, 14 in x 2 in x 8 in, 1 ea/Case
$335.29 / Each
| SKU | 7000120981 |
|---|---|
| Legacy SKU | 61500146198 |
| UPC | 50048011245299 |
| Product Number | X3-WL |
Scotch-Brite EX3 Deburring Wheel is a convolute-constructed, hard, durable deburring wheel suited for applications where edge retention is a must. The wheel performs best when consistently presented with a sharp edge or metal burrs. A unique resin system resists smearing and heat buildup.
- Highest edge retention and durability in the Scotch-Brite™ Deburring Wheel line provides aggressive edge deburring
- Specially engineered to condition sharp edges and metal burrs
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Non-woven web runs cool and lessens impact on heat-sensitive materials
- Unique resin system produces less smearing, reducing clean and prep time
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Center Hole Diameter | 8 in | 203.2 mm |
Shipping Dimensions |
|
| Weight | 8.00498 lb |
|---|---|
| Length | 14.48819 in |
| Width | 14.48819 in |
| Height | 2.67717 in |
| Color | Gray |
|---|---|
| Maximum Speed | 2,550 rpm |
PRODUCT FAQ
-
What is the Scotch-Brite™ EX3 Deburring Wheel mainly used for?
The Scotch-Brite™ EX3 Deburring Wheel is primarily used for burr removal and surface preparation tasks across a wide range of industries.
-
What size is the X3-WL, 9S Fine, 14 in x 2 in x 8 in, 1 ea/Case deburring wheel?
The X3-WL, 9S Fine, deburring wheel measures fourteen inches by two inches by eight inches and comes with one unit per case.
-
Is this deburring wheel suitable for hand grinding as well as machine use?
Yes! You can use these wheels on both machines and handheld grinders just like other rolls of wheels from our Scotch-Brite line.
-
How long does it take before I need to replace my ex-3 deburrer roll once I have started using it?
This will vary depending on how often you use your product launch pad. However, most customers find that these rolls last longer than other brands' equivalents!
-
. Can it be used in wet polishing applications too or only dry surfaces?
. You can certainly add water when working with Scotch-Brite™ EX3 Deburring Wheels. In fact they work better if you do so while operating at higher speeds than normal!
Scotch-Brite™ EX3 Deburring Wheel is an effective tool for deburring, blending, finishing, and polishing edges on various materials such as glass, hard and soft composites, and metals including builder's hardware, medical instruments, metal fabrication, metal implants, plumbing fixtures, and turbine engines. However, it is not recommended for applications where conformability and finishing of flat surfaces are required due to its hard density.
The EX3 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. On the other hand, aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
- Effective for deburring, blending, finishing, and polishing edges on various materials
- Available with silicon carbide or aluminum oxide abrasive mineral
- Silicon carbide produces a finer finish while aluminum oxide provides high cut-rate and long life
- Scotch-Brite™ industrial abrasives incorporate abrasives into non-woven nylon or synthetic fibers for consistent results
- Open-web material runs cool and is load resistant, keeping abrasive minerals cutting at high performance