through rough waters
Scotch-Brite™ EX3 Deburring Wheel, X3-WL, 8A Medium, 8 in x 1 in x 3 in, 3 ea/Case
$108.98 / Each
| SKU | 7000046044 |
|---|---|
| Legacy SKU | 61500125903 |
| UPC | 00048011271712 |
| Product Number | X3-WL |
Scotch-Brite EX3 Deburring Wheel is a convolute-constructed, hard, durable deburring wheel suited for applications where edge retention is a must. The wheel performs best when consistently presented with a sharp edge or metal burrs. A unique resin system resists smearing and heat buildup.
- Highest edge retention and durability in the Scotch-Brite™ Deburring Wheel line provides aggressive edge deburring
- Specially engineered to condition sharp edges and metal burrs
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Non-woven web runs cool and lessens impact on heat-sensitive materials
- Unique resin system produces less smearing, reducing clean and prep time
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Center Hole Diameter | 3 in | 76.2 mm |
Shipping Dimensions |
|
| Weight | 4.77301 lb |
|---|---|
| Length | 6.88976 in |
| Width | 6.88976 in |
| Height | 4.40945 in |
| Color | Gray |
|---|---|
| Maximum Speed | 4,500 rpm |
PRODUCT FAQ
-
What is the Scotch-Brite EX3 Deburring Wheel used for?
The Scotch-Brite EX3 Deburring Wheel is designed to remove burrs, sharp edges, and other surface contaminants from metal surfaces.
-
What size is the wheel?
The wheel measures 8 inches in diameter by 1 inch wide by 3 inches in height.
-
How many wheels come in a case?
Three wheels are included with each case of Scotch-Brite EX3 Deburring Wheels.
-
Is there any special maintenance required for this product?
It is recommended that you clean the wheel after use to maintain its performance. Just wash it gently with warm water and mild soap.
Scotch-Brite™ EX3 Deburring Wheel is an effective tool for deburring, blending, finishing, and polishing edges on various materials such as glass, hard and soft composites, and metals including builder's hardware, medical instruments, metal fabrication, metal implants, plumbing fixtures, and turbine engines. However, it is not recommended for applications where conformability and finishing of flat surfaces are required due to its hard density.
The EX3 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. On the other hand, aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. Although silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.