3M™ Trizact™ PSA Film Disc 568XA, 4 in x 1/2 in, Die 400DN, 50/Bag, 250 ea/Case

$3.33 / Each

SKU	7100187236
Legacy SKU	60440319865
UPC	00638060383728
Product Number	568XA

3M Trizact PSA Film Disc 568XA has all the benefits industrial professionals have come to expect from Trizact abrasives, including consistent and sharp cutting action. What makes this abrasive unique is the naturally-occurring mineral that's used: cerium oxide. It helps with glass defect repair and acrylic solid surface finishing by minimizing gouging.

Designed for defect repair, finishing and polishing
Natural cerium oxide mineral cuts sharply without gouging substrate
3M™ Trizact™ microreplication technology enhances consistent cutting action
Adhesive backing for swift, easy power tool attachment
Little water required for optimal results

Add to cart

High-Quality Surface Finishes

Reduces Abrasive Costs

Long Lasting Performance

Fantastic Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null

Shipping Dimensions
Weight	1.269 lb
Length	8.8748 in
Width	5.75 in
Height	6.06299 in

PRODUCT FAQ

What is the size of the 3M™ Trizact™ PSA Film Disc 568XA?

The size of these discs are 4 in x 1/2 in.
How many discs come in each package and case?

There are a total of 50 discs per inner, and a total of 250 discs per case.
What grit level is Die 400DN equivalent to?

Die 400DN is roughly equivalent to P1200 grit.
Can these discs be used on any type of surface or material?

Yes! These Trizact film discs can be used on various surfaces such as metals, plastics, woods and composites.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7100187236 | 3M™ Trizact™ PSA Film Disc 568XA

Finish and Repair Sensitive Surfaces

3M™ Trizact™ PSA Film Disc 568XA is designed to repair defects on sensitive surfaces such as glass, acrylic, and solid surfacing. The abrasive mineral, attached to a PSA backing using microreplication technology, cuts aggressively without significantly scratching or gouging the surface. This results in a high gloss finish, which is often desirable during surface finishing. The film backing is water-resistant and requires minimal water for touch-up, reducing mess and processing steps.

Swift Tool Attachment

The pressure-sensitive adhesive (PSA) on the back of 3M™ Trizact™ PSA Film Disc 568XA allows for easy attachment to power tools. The PSA backing adheres firmly to a backup pad with light pressure and can be easily peeled off, leaving a clean surface for the next abrasive in the sequence. The thin layer of adhesive between the abrasive and the backup pad allows for direct power transmission to the workpiece surface, resulting in aggressive sanding. Convenient liners reduce contamination of the adhesive, maximizing adherence to the disc pad.

3M™ Science, Applied to Trizact™ Abrasives

3M™ Trizact™ abrasives use microreplication technology to reduce processing steps, increase throughput, and create consistency. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral that break down after repeated use, exposing fresh mineral and sustaining the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. The mineral is uniformly distributed over the abrasive surface, providing consistent contact for a consistent cut.