through rough waters
3M™ Trizact™ PSA Film Disc 568XA, 3MIL, 8 in x NH, Die 800L, 50/Bag, 500 ea/Case
$13.90 / Each
| SKU | 7010361841 |
|---|---|
| Legacy SKU | 60440295560 |
| UPC | 00051125867566 |
| Product Number | 568XA |
3M Trizact PSA Film Disc 568XA has all the benefits industrial professionals have come to expect from Trizact abrasives, including consistent and sharp cutting action. What makes this abrasive unique is the naturally-occurring mineral that's used: cerium oxide. It helps with glass defect repair and acrylic solid surface finishing by minimizing gouging.
- Designed for defect repair, finishing and polishing
- Natural cerium oxide mineral cuts sharply without gouging substrate
- 3M™ Trizact™ microreplication technology enhances consistent cutting action
- Adhesive backing for swift, easy power tool attachment
- Little water required for optimal results
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Diameter | 8 in | 203.2 mm |
| Center Hole Diameter | 0 NP | 0.0 NP |
Shipping Dimensions |
|
| Weight | 11.18295 lb |
|---|---|
| Length | 9.01575 in |
| Width | 9.01575 in |
| Height | 6.41732 in |
PRODUCT FAQ
-
What is the 3M™ Trizact™ PSA Film Disc 568XA used for?
The 3M™ Trizact™ PSA Film Disc 568XA is designed to remove defects and smooth out surfaces in automotive paint finishing.
-
What does "Die 800L" mean in the product description?
"Die 800L" refers to the level of microns that are present on each abrasive grain. In other words, it indicates its level of coarseness.
-
How many discs come in a case of these film discs?
There are a total of 500 3M™ Trizact™ PSA Film Discs per case, with an inner packaging containing fifty (50) discs each.
-
Is this disc suitable for wet sanding or dry sanding purposes?
The intended application method for these film discs is dry sanding, although they can be used via wet applications such as spraying water on them during use
-
. Can I use this product on both curved and flat surfaces alike?
. Yes! With their ability to contour themselves easily around corners and maintain consistency while smoothing even flat surfaces, These Trizact units work marvelously either way.
3M™ Trizact™ PSA Film Disc 568XA is designed to repair defects on sensitive surfaces such as glass, acrylic, and solid surfacing. The abrasive mineral, attached to a PSA backing using microreplication technology, cuts aggressively without significantly scratching or gouging the surface. This results in a high gloss finish, which is often desirable during surface finishing. The film backing is water-resistant and requires minimal water for touch-up, reducing mess and processing steps.
Swift Tool AttachmentThe pressure-sensitive adhesive (PSA) on the back of 3M™ Trizact™ PSA Film Disc 568XA allows for easy attachment to power tools. The PSA backing adheres firmly to a backup pad with light pressure and can be easily peeled off, leaving a clean surface for the next abrasive in the sequence. The thin layer of adhesive between the abrasive and the backup pad allows for direct power transmission to the workpiece surface, resulting in aggressive sanding. Convenient liners reduce contamination of the adhesive, maximizing adherence to the disc pad.
3M™ Science, Applied to Trizact™ Abrasives3M™ Trizact™ abrasives use microreplication technology to reduce processing steps, increase throughput, and create consistency. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral that break down after repeated use, exposing fresh mineral and sustaining the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. The mineral is uniformly distributed over the abrasive surface, providing consistent contact for a consistent cut.
- 3M™ Trizact™ PSA Film Disc 568XA is designed for defect repair on sensitive surfaces.
- The PSA backing allows for easy attachment to power tools.
- 3M™ Trizact™ abrasives use microreplication technology to reduce processing steps, increase throughput, and create consistency.
