through rough waters
3M™ Trizact™ PSA Film Disc Roll 568XA, 3MIL, 5 in x NH, Die 500X, 25 Discs/Roll, 4 Rolls/Case
$138.67 / Roll
| SKU | 7010325694 |
|---|---|
| Legacy SKU | 60410006641 |
| UPC | 00051111496749 |
| Product Number | 568XA |
3M Trizact PSA Film Disc Roll 568XA utilizes microreplicated cerium oxide uniformly distributed across a 3-mil film backing to create a high gloss on glass, and solid surfaces. Use 568XA film discs wet. Pressure sensitive adhesive backing in disc roll form makes handling and attachment easy.
- Microreplicated cerium oxide delivers high gloss, crisp reflection, richer appearance
- 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
- Adhesive-backed discs easily peel off from the roll for quick handling and minimal downtime
- Use wet for glass defect repair and solid surface finishing
Product Dimensions |
Imperial | Metric |
| Weight | 0.18607 lbs | |
|---|---|---|
| Width | 5.51181 in | |
| Length | 5.51181 in | |
| Height | 1.49606 in | |
| Center Hole Diameter | 0 NP | 0.0 NP |
Shipping Dimensions |
|
| Weight | 1.18102 lb |
|---|---|
| Length | 8.38583 in |
| Width | 8.38583 in |
| Height | 7.00787 in |
| Color | White |
|---|---|
| Maximum Speed | 12,000 rpm |
PRODUCT FAQ
-
What size are the 3M™ Trizact™ PSA Film Disc Roll 568XA?
The size of each disc in the roll is 5 inches x NH.
-
How many discs are included in a single roll?
Each roll includes 25 discs.
-
And how many rolls come per case?
Four rolls come per case, providing plenty of discs for multiple projects.
-
What does "Die 500X" mean and what impact does it have on performance?
Die 500X refers to the density level of the abrasive grains. This particular product has very fine grain density that results in superior, consistent finishing with reduced processing time.
-
Is this a permanent adhesive or will it damage surfaces once removed after use?
The pressure-sensitive adhesive (PSA) backing used on these rolls is designed to securely hold onto surfaces while allowing you to cleanly remove them without damaging your project or surface.
3M™ Trizact™ PSA Film Disc Roll 568XA is designed with Trizact microreplicated cerium oxide, ensuring a fast, consistent cut rate that easily removes defects such as scuffs, scratches, and acid marks on table glass, airplane windscreens and windows, architectural glass, and other solid surfaces. The film backing is water-resistant and requires little water for touch-up, minimizing mess and processing steps.
Convenient PSA Disc Rolls Minimize Downtime3M™ Trizact™ PSA Film Disc Roll 568XA provides multiple adhesive-backed discs on a single roll of liner. This makes them easy to peel off one at a time, efficient to store, and economical. The pressure-sensitive adhesive coating on the backs is quick and simple to use – simply press the disc onto the backup pad and you're ready to go. They remove just as cleanly, leaving an uncontaminated surface for the next disc.
About Cerium OxideCerium oxide is an oxide of the rare earth metal, cerium. The average grain size of the particle is measured in nanometers in raw form, making it one of the most effective abrasives for final polishing steps on solid surfaces. It is heat-resistant and effective as a polishing agent for glass mirrors, plate glass, crystal, ophthalmic lenses, precision optics, and precious and semiprecious stones.
Trizact Abrasives3M™ Trizact™ abrasives are engineered using 3M microreplication — the creation of microscopic 3-dimensional structures applied to a backing in a uniform and precise pattern. These pyramid-like structures contain multiple layers of mineral. When they break down during use, fresh cutting mineral continues to be exposed so results are consistent throughout the life of the abrasive. Ongoing sharp cutting action contributes to higher throughput, more uniform results, and greater productivity.
Polishes and Leaves Glass Crystal ClearUse 3M™ Trizact™ 568XA discs for a final polish. First, wet the surface slightly with a small amount of water. As you polish, the mineral "pyramids" will break down to form a slurry-like solution. The polishing action that occurs will remove scratches left by previous leveling steps. For acrylic-filled solid surfaces, use 568XA damp as a final step to attain a high-gloss finish. Remove silica coatings (anti-glare and static) and fluoric acid spots in a single step with 568XA.
