3M™ Tape Primer 94, Light Yellow, 0.66 mL, Ampule, 500 Each/Case

$1.44 / Each

SKU	7100306437
Legacy SKU	70007550604
UPC	00021200242168
Product Number	94

3M Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.

Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
Dries to a clear finish
Cleans up with isopropyl alcohol

Add to cart

Immense Durability

Superior Bond Strength

Global Shipping

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0.006 lbs
Width	3.2 in
Length	0.4 in
Height	0.4 in

Shipping Dimensions
Weight	4.31004 lb
Length	14.9 in
Width	10.90551 in
Height	6.61417 in

PRODUCT FAQ

What is the purpose of 3M™ Tape Primer 94?

The Tape Primer 94 is designed to help improve adhesion of tape to various surfaces.
How much primer is in each ampule of the Light Yellow 0.66 mL size?

Each ampule contains 0.66 mL of primer for convenient and precise application.
How many ampules come in a case of this product?

There are 500 individual ampules included in each case, offering you plenty for your adhesive needs.
Is the Light Yellow color visible on most surfaces after application?

The Light Yellow tint helps ensure thorough coverage during application, but it typically dries clear and should not be visible once dry.
Can this primer be used with all types of tapes or only specific ones?

It is specifically formulated to enhance adhesion with certain pressures sensitive tapes, so it works best when paired with compatible products from 3M's line-up.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Dries in Minutes for Efficient Use

Ensure that your surface is clean and dry before applying a thin, even coat of 3M Tape Primer 94. It is important to keep the primed surface free from any contaminants before applying the tape. It is recommended to use the minimum amount of product necessary, as applying too much can result in sub-optimal results. Allow the primer to completely dry, which typically takes about 5 minutes at room temperature, before applying the tape. Please note that porous surfaces may require two applications for uniform coverage and good adhesion. Allow the first coat of primer to dry before applying a second coat.

Recommended Applications

Promote adhesion of 3M VHB Tape
For use on various plastic, rubber, painted, and bare metal substrates

Application Tips

3M Tape Primer 94 can be applied using a brush, swab, pressurized flow gun, knurled roller, or similar equipment. It can be removed with isopropyl alcohol, although vigorous scrubbing may be required.