3M™ Tape Primer 94, Light Yellow, 1 Gallon (Can), 4 Bottles/Case

$191.23 / Bottle

SKU	7000001583
Legacy SKU	70016054762
UPC	00021200239304
Catalog Number	94
Product Number	94

3M Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.

Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
Dries to a clear finish
Cleans up with isopropyl alcohol

Add to cart

Immense Durability

Superior Bond Strength

Global Shipping

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	7.64122 lbs
Width	6.8189 in
Length	6.82008 in
Height	7.6 in

Shipping Dimensions
Weight	32.77392 lb
Length	19.37008 in
Width	16.14173 in
Height	9.01575 in

Color	Yellow

PRODUCT FAQ

What is 3M Tape Primer 94?

3M™ Tape Primer 94, Light Yellow, is a primer that promotes adhesion of tapes to surfaces. This product can help improve tape adhesion to plastics and paints.
What types of surfaces is it compatible with?

It can be used on a wide range of surfaces including metal, glass, wood and painted surfaces.
How do I apply the primer?

The recommended method for applying the primer is by brush or swab in an even coat. Allow adequate time for drying before application of the tape. For more detailed instructions please refer to the product data sheet available on our website or reach out to us directly if you have any questions

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Dries in Minutes for Efficient Use

For optimal results, ensure that the surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. It is important to use the minimum amount of product necessary, as over-application can lead to sub-optimal results. The primed surface must remain free from contaminants before applying the tape. Allow the primer to dry completely, which usually takes about 5 minutes at room temperature, before applying the tape. If the surface is porous, it may require two applications for uniform coverage and good adhesion. Allow the first application of primer to dry before applying a second coat.

Recommended Applications

Promote adhesion of 3M™ VHB™ Tape
For use on many plastic, rubber, painted and bare metal substrates

Application Tips

3M™ Tape Primer 94 can be applied using a brush, swab, pressurized flow gun, knurled roller, or similar type of equipment. It can be removed with isopropyl alcohol, although vigorous scrubbing may be required.