Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7100206851
Legacy SKU 60440400426
UPC 00638060756836
Product Number 741A

The 3M Flap Wheel 741A was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.

  • Ceramic aluminum oxide blend offers excellent cut rate and life for better performance
  • X-weight polyester/cotton backing withstands aggressive sanding and grinding
  • Resin bonding resists thermal and chemical deterioration for extended wheel life
  • Abrasive flap design provides a soft and smooth cut on rounded or irregular surfaces
  • Flaps wear down to expose fresh abrasive mineral, assuring a fast and consistent cut
  Add to cart
On it's way to you January 17  

Qty

Minimum Order 3 Items
Order Increment 3 Items
  Immense Durability
  Easy To Use
  Global Shipping
  Lowest Price Per Item
Product Dimensions
Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Center Hole Diameter 1 in 25.4 mm
Shipping Dimensions
Weight 9.27198 lb
Length 8.58268 in
Width 8.50394 in
Height 6.69291 in

PRODUCT FAQ

  1. What is the 3M™ Flap Wheel 741A used for?

    The 3M™ Flap Wheel 741A is commonly used to grind and blend in hard-to-reach areas, making it perfect for various applications such as deburring, surface finishing, and other metalworking tasks.

  2. What are the dimensions of this flap wheel, and what type of abrasive grain does it use?

    This flap wheel has a size of 8 inches x 2 inches x 1 inch with a weight classifying X-weight. It also utilizes ceramic abrasive grain that keeps its sharpness even during heavy usage.

  3. How many items come per case?

    Each case of the 3M™ Flap Wheel comes with three units inside.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Mixed Ceramic Abrasive

The 3M™ Flap Wheel 741A is a versatile tool that features a ceramic abrasive mix on each flap. This mix was created using a proprietary process that enhances the toughness and hardness of the grain. The mix consists of aluminum oxide blended with 3M ceramic grain, resulting in a harder and longer-lasting abrasive. Ceramic abrasives are engineered to cut fast and handle intense heat and stress applications, making them perfect for light to moderate stock removal. The ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability, making the 3M Flap Wheel 741A an excellent choice for moderate stock removal and surface preparation.

Tough Construction

The abrasive mix is attached to a flexible backing using a resin bond that resists thermal and chemical deterioration during high-speed sanding. The bond is very hard, allowing for faster cuts and a higher cut rate. Each flap uses an X-weight polyester/cotton backing, providing a tough and flexible surface that bends to fit any workpiece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, ensuring that surfaces are sanded consistently throughout the life of the wheel.

Flap Wheel Design

Coated Abrasive flap wheels are the ideal choice for light grinding, blending, graining, and scale removal on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives and a load-resistant design. The 3M Flap Wheel 741A is available in both flange mounted and spindle mounted constructions with general-purpose aluminum oxide or high-performing 3M ceramic aluminum oxide blend abrasive grain.

Brochures, Catalogs & Data Sheets
Other Products in this Family

Lead times are estimates and may vary based on our suppliers' product availability.