SKU | 7100167134 |
---|---|
Legacy SKU | 60440332561 |
UPC | 00076308456016 |
Product Number | 741A |
The 3M Flap Wheel 741A was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.
- Ceramic aluminum oxide blend offers excellent cut rate and life for better performance
- X-weight polyester/cotton backing withstands aggressive sanding and grinding
- Resin bonding resists thermal and chemical deterioration for extended wheel life
- Abrasive flap design provides a soft and smooth cut on rounded or irregular surfaces
- Flaps wear down to expose fresh abrasive mineral, assuring a fast and consistent cut
Product Dimensions |
Imperial | Metric |
Weight | 0 NULL | |
---|---|---|
Width | 0 null | |
Length | 0 null | |
Height | 0 null | |
Center Hole Diameter | 5/8 in | 15.875 mm |
Shipping Dimensions |
|
Weight | 7.317 lb |
---|---|
Length | 21.08976 in |
Width | 5.62992 in |
Height | 6.32992 in |
PRODUCT FAQ
-
What is the 3M™ Flap Wheel 741A used for?
The 3M™ Flap Wheel 741A is ideal for blending, deburring, and finishing metals. It can be used on a wide variety of surfaces like stainless steel, carbon steel, titanium, and more.
-
What are the dimensions of this flap wheel?
This particular flap wheel measures at 3-1/2 inches by 2 inches with a thickness of 5/8 inch.
-
How many pieces come in each case?
There are ten (10) pieces included in each case of the 3M™ Flap Wheel 741A.
-
What grit level does this flap wheel have?
The abrasive material has a grit level X-weight rating of sixty (60).
The 3M™ Flap Wheel 741A is a versatile tool that features a ceramic abrasive mix on each flap. This mix was created using a proprietary process that enhances the toughness and hardness of the grain. The mix consists of aluminum oxide blended with 3M ceramic grain, resulting in a harder and longer-lasting abrasive. Ceramic abrasives are engineered to cut fast and handle intense heat and stress applications, making them perfect for light to moderate stock removal. The ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability, making the 3M Flap Wheel 741A an excellent choice for moderate stock removal and surface preparation.
Tough ConstructionThe abrasive mix is attached to a flexible backing using a resin bond that resists thermal and chemical deterioration during high-speed sanding. The bond is very hard, allowing for faster cuts and a higher cut rate. Each flap uses an X-weight polyester/cotton backing, providing a tough and flexible surface that bends to fit any workpiece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, ensuring that surfaces are sanded consistently throughout the life of the wheel.
Flap Wheel DesignCoated Abrasive flap wheels are the ideal choice for light grinding, blending, graining, and scale removal on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives and a load-resistant design. The 3M Flap Wheel 741A is available in both flange mounted and spindle mounted constructions with general-purpose aluminum oxide or high-performing 3M ceramic aluminum oxide blend abrasive grain.