through rough waters
3M™ Adhesive Transfer Tape 9498, Clear, 48 in x 60 yd, 2 mil, 1 Roll/Case
$633.63 / Roll
| SKU | 7010372836 |
|---|---|
| Legacy SKU | 70006255726 |
| UPC | 00021200407895 |
| Catalog Number | 9498 |
| Product Number | 9498 |
3M Adhesive Transfer Tape 9498 offers excellent flying splice and core starting wet grab characteristics. It is typically used in the printing industry and performs well at process speeds exceeding 2,000 feet per minute. This tape can be used in ovens up to 450F (232C) if dwell times are ten seconds or less and up to 250F (232C) for longer periods.
- Ultra-high peel strength and excellent shear strength to withstand rigorous splicing applications
- Bonds well to most substrates, including low surface energy plastics
- Moderate temperature resistance up to 250⁰F (121⁰C)
- 60lb Densified Kraft (DK) liner for ease in die-cutting operations
- Conformable to irregular surfaces
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Thickness | 2 mil | 0.05 mm |
Shipping Dimensions |
|
| Weight | 22 lb |
|---|---|
| Length | 50.2 in |
| Width | 8.5 in |
| Height | 8.5 in |
PRODUCT FAQ
-
What is 3M™ Adhesive Transfer Tape 9498 used for?
This tape provides high adhesion to a wide variety of substrates, including plastics and foams. It's commonly used in the automotive and electronics industries for attaching decorative trim and bonding displays.
-
How strong is the adhesive on this transfer tape?
The general-purpose acrylic adhesive has excellent resistance to aging, UV light, chemicals, heat and cold temperatures. When properly applied, it forms a strong bond that can withstand demanding conditions.
-
How do I apply the tape?
Simply remove the liner to expose the adhesive backing, then position it onto your chosen surface. Pressure-sensitive adhesives work best when firm pressure is applied consistently throughout the length of the tape.
-
What sizes does this product come in?
Our 3M™ Adhesive Transfer Tape 9498 Clear comes in roll dimensions of 48 inches by 60 yards with an overall thickness of two mils (0.002 inches), packed into one roll per case.
3M™ Adhesive Transfer Tape 9498 is an excellent choice for rigorous splicing applications and bonding plastics to metals. Once bonded, it provides excellent peel and shear strength. The tape features a 2.0 mil high tack acrylic adhesive mounted on a tan 60 lb. densified kraft paper liner, making it easy to use in die cutting applications.
Recommended Applications- Web splicing
- Core starting
- General purpose bonding
The adhesive used in 3M™ Adhesive Transfer Tape 9498 is a medium-firm pressure sensitive acrylic adhesive system. It has a good balance of initial adhesion and shear holding power. Shear strength is the measure of pull force directed across the bonded surface, forcing the two surfaces to slide over each other. The adhesive has a consistently strong bond across a range of temperatures, from 180°F (82°C) long term to 250°F (121°C) short term and in 450ºF (232ºC) if dwell times are ten seconds or less. The tape uses a robust 60 lb. densified kraft paper release liner, providing reliable performance for industrial applications, such as die-cutting and automated dispensers.
What is Adhesive Transfer Tape?3M™ Adhesive Transfer Tapes are rolls of pressure sensitive adhesive pre-applied to a special release liner. To apply, simply press the tape, adhesive side down, to a surface and peel off the liner. A variety of adhesive properties and liners are available to meet requirements for applications such as nameplate attachment to high and low surface energy plastics, appliance graphic overlays that perform in high temperatures, foam gasketing, web splicing, signs, posters, banners, point-of-purchase displays, and more.
