3M™ Stikit™ Paper Disc Roll 426U, 320 A-weight, 5 in x NH, Die 500X, 175 Discs/Roll, 6 Rolls/Case

$63.57 / Roll

SKU	7000119240
Legacy SKU	60440231300
UPC	00051141277837
Product Number	426U

3M Stikit Paper Disc Roll 426U are multiple sanding discs packaged in a roll for convenience and use in high-production environments and ideal for white wood sanding, sealer sanding, solid surface or where fine finish is critical. The disc itself features silicon carbide abrasive with a load-resistant coating and open coat abrasives that work together to minimize loading.

Ideal for general purpose sanding on wood, metal, plastic, dry wall, fiberglass, glass, clear coat, and ceramic
Open coat construction provides aggressive cut and reduced loading
Anti-load coating helps prevent clogging and produce consistent finishes
Light, A-weight paper flexes with the backup pad
3M™ Stikit™ adhesive provides fast attachment and clean removal for multi-step finishing processes

Add to cart

Superior Cut Rate

Durable

Custom Fit

Can Use on Many Surfaces

Product Dimensions	Imperial	Metric
Weight	1.0009 lbs
Width	9-1/2 in
Length	11 in
Height	7 in
Diameter	5 in	127 mm
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	6.49923 lb
Length	12.9 in
Width	10.9 in
Height	4.3 in

Color	Gray

PRODUCT FAQ

What is the grit of the 3M™ Stikit™ Paper Disc Roll 426U?

The 3M™ Stikit™ Paper Disc Roll 426U has a grit of 320 A-weight.
Can you tell me about the size and quantity of discs in this roll?

The roll consists of discs that are each 5 inches by NH size. There are a total of 175 discs per roll, and there are six rolls included in each order.
What is "Die 500X" referring to in the product description?

Die refers to how these discs were cut out from large sheets. In this case, it was done with a precision die-cutting method known as "Die Cut". This ensures consistent results every time you use them.
Is there any special storage required for these paper disc rolls to keep them from getting damaged before I use them?

We recommend storing your rolls in an area free from moisture or high humidity levels. Keep them at room temperature when possible, and be sure to avoid exposing your supply to extreme changes in temperature since they can cause damage over time.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000119240 | 3M™ Stikit™ Paper Disc Roll 426U

UPC 00051141277837 | 3M™ Stikit™ Paper Disc Roll 426U

The 426U Sanding Disc

The 426U sanding disc features a silicon carbide abrasive, which is fast cutting, creates a smoother finish than aluminum oxide or garnet abrasives, and is effective for finishing on hard woods and solid surfaces. Constructed with A-weight, light paper and a pressure sensitive adhesive (PSA) backing, this disc will flex with the backup pad and flow over contours to produce consistent finishes. The adhesive holds the disc securely during use and provides quick and easy change out for multi-step sanding and finishing processes. These discs are suited for rotary and random orbital sanders. Applications include general sanding, finishing, blending, surface leveling, and prep prior to staining or painting, and bare wood sanding.

Sanding discs cut better and last longer when dust isn't loading the cutting surface of the abrasives. Loading occurs when wood or paint dust clogs the surface of the disc and the abrasive points, which can quickly make the disc ineffective. Open coat construction means the abrasive grains are spaced so that dust and debris can collect in the spaces rather than loading the disc. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade, for faster results.

Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as white wood sanding, finishing and paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.

3M™ Stikit™ Products

3M™ Stikit™ products are designed to handle a wide range of sanding and finishing needs. These high-quality abrasive products come ready to use with a pressure sensitive adhesive coating on the backside so they conveniently press on to a backup pad or hand pad, and remove cleanly, leaving an uncontaminated surface for the next disc.