Scotch-Brite™ SE Surface Conditioning Belt, SE-BS, A/O Coarse, 1/2 in x 24 in, 20 ea/Case

$9.73 / Each

SKU	7000046006
Legacy SKU	61500112646
UPC	00048011180885
Product Number	SE-BS

The durable Scotch-Brite SE Surface Conditioning Belt was built to last, resisting both wear and sharp edges when used for cleaning, blending, deburring and finishing on a variety of metals.

Tough aggressive non-woven belt offered in a wide range of grades for heavy duty deburring and finishing
For use on backstand and off hand equipment
Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges
Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
Aggressive cutting without gouging, removes surface imperfections, grindlines, mill, and other marks

Add to cart

High-Quality Materials

Immensely Durable

Versatile

Multi-Functional

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null

Shipping Dimensions
Weight	1.2498 lb
Length	10.59055 in
Width	10.59055 in
Height	4.76378 in

Color	Blue, Brown

PRODUCT FAQ

What is the material of 3M's Scotch-Brite SE Surface Conditioning Belt?

Our Scotch-Brite SE Surface Conditioning Belt is made of abrasive-filled nylon fibers, making it efficient in cleaning and finishing surfaces.
What are the dimensions of each belt's abrasive component?

The aluminum oxide coarse grit measures at half an inch wide and twenty-four inches long per belt. Each case contains 20 belts for your convenience.
Can these belts be used wet or dry?

Absolutely! These surface conditioning belts can work on a variety of materials when operating with oil, water, detergents, or dry to suit any preference in order to clean or prepare for painting your chosen surface.
How long does each belt last before losing its efficiency?

Depending on the usage frequency and intensity, our customers have experienced good performance over multiple uses from one single belt. In fact, you'll find that our high-quality product provides longer life than other similar products available in today's market.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000046006 | Scotch-Brite™ SE Surface Conditioning Belt

Scotch-Brite™ SE Surface Conditioning Belt is a high-performance abrasive belt that is constructed of resin-reinforced non-woven fiber. This belt is designed to resist loading and avoid under-cutting or gouging of the work piece. It exhibits high initial and extended rates of cut, while maintaining superior edge durability. All belts may be used for "low stretch" applications.

The belt includes a woven fabric (scrim) that is embedded in the nylon structure to provide additional strength and durability for edge work, deburring, and efficient blending of all metal types. The non-woven material combined with abrasive grain is an ideal way to add a great finish or remove burrs. Trust Scotch-Brite™ Belts to deliver fantastic finishes.

Scotch-Brite™ SE Surface Conditioning Belt uses course grade aluminum oxide abrasive. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

Belt sanders are used for rapid grinding, sanding, and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.