Scotch-Brite™ Metal Finishing Convolute Wheel, MF-WL, 4A Medium, 8 in x 2 in x 3 in, 2 ea/Case

$226.43 / Each

SKU	7000045990
Legacy SKU	61500109550
UPC	00048011018744
Product Number	MF-WL

Scotch-Brite Metal Finishing Wheel combines conformability with consistent abrasive cutting action to provide uniform brushed stainless and satin finishes. The Metal Finishing Wheel is also used effectively to blend and match #3 or #4 mill finishes on stainless steel and to create brushed or satin finishes on items such as cutlery, appliance trim, builders hardware, and plumbing fixtures.

High conformability and uniform wear provides consistent cutting power to produce superior satin, mill and brushed finishes
Open-web construction resists loading and runs cool to provide professional results on stainless steel, brass, aluminum and other metals
Controlled abrasive action helps prevent undercutting or gouging
Highly conformable wheel effectively finishes irregular or contoured surfaces
Convolute construction wound around a fiber core runs smooth to provide fine, uniform finishing

Add to cart

Multi-Functional

Versatile Across Industries

Easy To Use

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Center Hole Diameter	3 in	76.2 mm

Shipping Dimensions
Weight	2.91495 lb
Length	8.70079 in
Width	8.50394 in
Height	4.84252 in

Color	Maroon
Maximum Speed	4,500 rpm

PRODUCT FAQ

What sizes are available for the Scotch-Brite™ Metal Finishing Wheel, MF-WL?

The MF-WL wheel is available in 8 inches x 2 inches x 3 inches size with two wheels per case.
Can this wheel be used on any metal?

Yes! This wheel can be used to finish metals like aluminum, brass, bronze, carbon steel and stainless steel as well.
Does it contain abrasive materials which can harm my skin while using?

All of our products are designed to prioritize your safety first and foremost. So don't worry about harming your hands; you should always wear gloves when using abrasives anyway.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000045990 | Scotch-Brite™ Metal Finishing Convolute Wheel

Scotch-Brite™ Metal Finishing Wheel is a highly conformable wheel that is convolutely wound on a core to run smoothly and help create professional finishing results. It is used on softer metals like aluminum, copper, and brass to blend out minor surface imperfections and handling marks while providing the desired decorative finish on products such as builder's hardware and plumbing fixtures. Typically used on stationary machinery, the wheels are available in diameters of 6 to 16 inches and widths of 1/2 inch and greater. This product is available in grade CRS and MED.

The wheel uses aluminum oxide abrasive, which is widely used in grinding applications due to its high cut-rate, hardness, strength, and low heat retention. It is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. By combining abrasives with the fibers, an abrasive system is created that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.