through rough waters
Scotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 3 in x 1/2 in, 50 ea/Case
$7.76 / Each
| SKU | 7100097479 |
|---|---|
| Legacy SKU | 61500006038 |
| UPC | 00048011009377 |
| Product Number | CS-DC |
Scotch-Brite Clean and Strip Disc was designed to help operators tackle tough metalworking challenges: think paint prep and coating and corrosion removal. When removing unwanted contaminants and stubborn imperfections or smoothing a rough surface its a good idea to have a load-resistant, sharp-cutting abrasive on hand.
- Removes paint, rust and coatings quickly without compromising the geometry of the workpiece
- Thin width gets into tight corners for complete cleaning, stripping, and surface prep
- Provides greater surface area than wire brushes
- Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
- Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
- Smear resistant, non-woven web material provides uniform wear over the life of the disc
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Center Hole Diameter | 1/2 in | 12.7 mm |
Shipping Dimensions |
|
| Weight | 2.99829 lb |
|---|---|
| Length | 10.6 in |
| Width | 10.6 in |
| Height | 4.8 in |
| Color | Black |
|---|---|
| Thread Size | Non Pertinent |
| Maximum Speed | 8,500 rpm |
PRODUCT FAQ
-
What is the 3M Scotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse made for?
The 3M Scotch-Brite™ Clean and Strip Disc is designed to remove heavy rust, paint, and coatings from metal surfaces.
-
How many discs come in a case of the 3M Scotch-Brite™ Clean and Strip Discs?
There are 50 discs in each case of the 3M Scotch-Brite™ Clean and Strip Discs.
-
Can I use this disc on wood or plastic surfaces?
No, it's not recommended to use this disc on wood or plastic surfaces as it can be too abrasive. It's best suited for metals that require heavy-duty cleaning.
-
Is there a specific angle at which I need to operate the disc for maximum efficiency?
Yes! For optimal results with the strip disc, you should run it at an angle between 15-25 degrees. This allows you to work efficiently while also preventing damage to surrounding areas of your project under construction.
-
Can I reuse these clean-and-strip discs more than once?
While you may be able to reuse them depending upon usage conditions,your time savings typically outweigh any cost benefits because they might have degraded over time or after initial use. We recommend replacing worn out discs immediately rather than compromising performance with continuing damaged ones.
Scotch-Brite™ Clean and Strip Disc has all the benefits operators have come to expect from Scotch-Brite™ abrasives, including good load resistance and consistent cutting action. This abrasive is ideal for high-production environments and projects that generate a lot of dust, such as coating and corrosion removal. The disc features a standard attachment system and may be connected to a backstand, right angle grinder or die grinder.
Silicon Carbide Mineral Cuts Sharp and Leaves a Bright FinishNylon fibers on Scotch-Brite™ Clean and Strip Disc are interspersed with extra-coarse (XCS) silicon carbide mineral. This disc uses extra-coarse (XCS) mineral, because it cuts more aggressively than minerals in a finer grade. Among synthetic minerals, silicon carbide is one of the sharpest. It breaks down faster than aluminum oxide but leaves a finer finish.
The Many Benefits of Scotch Brite™ AbrasivesAs a Scotch-Brite™ product, this disc is engineered with open nylon web, which is why it's such a great match for cleaning welds, removing rust and stripping paint. The gaps between nylon fibers permit debris to escape. The benefits of this are twofold. First, it enhances the abrasive's ability to withstand loading. Second, because the abrasive does not get clogged with debris as easily, it has prolonged service life. The nylon fibers break down continuously during grinding, revealing fresh mineral for ongoing sharp cutting action and consistent finishes – part after part.
