through rough waters
Scotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 4 in x 1/4 in, 25 ea/Case
$10.82 / Each
| SKU | 7000144151 |
|---|---|
| Legacy SKU | 61500120847 |
| UPC | 00048011074603 |
| Product Number | CS-DC |
Scotch-Brite Clean and Strip Disc was designed to help operators tackle tough metalworking challenges: think paint prep and coating and corrosion removal. When removing unwanted contaminants and stubborn imperfections or smoothing a rough surface its a good idea to have a load-resistant, sharp-cutting abrasive on hand.
- Removes paint, rust and coatings quickly without compromising the geometry of the workpiece
- Thin width gets into tight corners for complete cleaning, stripping, and surface prep
- Provides greater surface area than wire brushes
- Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
- Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
- Smear resistant, non-woven web material provides uniform wear over the life of the disc
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Center Hole Diameter | 1/4 in | 6.35 mm |
Shipping Dimensions |
|
| Weight | 2.349 lb |
|---|---|
| Length | 8.70079 in |
| Width | 8.50394 in |
| Height | 4.80315 in |
| Color | Black |
|---|---|
| Thread Size | Non Pertinent |
| Maximum Speed | 6,000 rpm |
PRODUCT FAQ
-
What is the Scotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 4 in x 1/4 in used for?
The Scotch-Brite™ Clean and Strip Disc is ideal for removing surface contaminants without damaging the base material. It effectively removes rust, paint, corrosion, gaskets and other coatings.
-
How many discs come with each case of the Scotch-Brite™ Clean and Strip Disc?
Each case of the Scotch-Brite™ Clean and Strip Disc comes with 25 discs.
-
Is the Silicon Carbide (SiC) abrasive safe to use on all surfaces?
The SiC abrasive can be aggressive so we recommend that users test it on a small area prior to full use to make sure any surface damage will not occur.
Scotch-Brite™ Clean and Strip Disc has all the benefits operators have come to expect from Scotch-Brite™ abrasives, including good load resistance and consistent cutting action. This abrasive is ideal for high-production environments and projects that generate a lot of dust, such as coating and corrosion removal. The disc features a standard attachment system and may be connected to a backstand, right angle grinder or die grinder.
Silicon Carbide Mineral Cuts Sharp and Leaves a Bright FinishNylon fibers on Scotch-Brite™ Clean and Strip Disc are interspersed with extra-coarse (XCS) silicon carbide mineral. This disc uses extra-coarse (XCS) mineral, because it cuts more aggressively than minerals in a finer grade. Among synthetic minerals, silicon carbide is one of the sharpest. It breaks down faster than aluminum oxide but leaves a finer finish.
The Many Benefits of Scotch Brite™ AbrasivesAs a Scotch-Brite™ product, this disc is engineered with open nylon web, which is why it's such a great match for cleaning welds, removing rust and stripping paint. The gaps between nylon fibers permit debris to escape. The benefits of this are twofold. First, it enhances the abrasive's ability to withstand loading. Second, because the abrasive does not get clogged with debris as easily, it has prolonged service life. The nylon fibers break down continuously during grinding, revealing fresh mineral for ongoing sharp cutting action and consistent finishes – part after part.
