3M™ Cubitron™ II Flap Disc 967A, 40+, T27, 4-1/2 in x 7/8 in, 10 ea/Case, Single Pack

$7.70 / Each

SKU	7100094358
Legacy SKU	60440296527
UPC	00051125868556
Product Number	967A

3M Cubitron II Flap Disc 967A is ideal for medium-pressure applications on flat and contoured surfaces, especially in light deburring or weld leveling to prep for paint in mild steel. Its also great for stainless steel fabrication where finish and gouge resistance are important. Powered by 3M Precision-Shaped Grain, this disc cuts fast and lasts long.

Ideal 3M flap disc for medium-duty applications like weld removal and surface preparation
Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
Poly-cotton backing delivers controlled, even wear in medium unit pressure applications
Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
Easy to use, with less gouging than fiber discs and bonded wheels
Offers a great balance of fast cut and long life

Add to cart

Premium Deburring, Grinding and Finishing

For Right Angle Grinders

Long Lasting Performance

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0.28881 lbs
Width	0.68819 in
Length	4-3/4 in
Height	4-3/4 in
Center Hole Diameter	7/8 in	22.225 mm

Shipping Dimensions
Weight	3.1482 lb
Length	8.38583 in
Width	5.19685 in
Height	5.59055 in

Color	Maroon
Maximum Speed	13,300 rpm

PRODUCT FAQ

What is the 3M™ Cubitron™ II Flap Disc 967A used for?

The 3M™ Cubitron™ II Flap Disc 967A is a versatile grinding wheel designed to handle multiple surfaces such as carbon steel, stainless steel, and mild steel.
What makes this flap disc unique?

The advanced design of the Cubitron abrasive grain provides an exceptional cut rate and extended product life compared to traditional flap discs. Its precision shaped grain allows it to self-sharpen with less pressure, reducing heat build-up and offering faster cutting action on metal.
How many discs come in each pack?

There are ten (10) individual flaps in each case or single pack.
Can this flap disc be used with a variety of power tools?

Yes! This flap disc can be utilized on different types of angle grinders that have the same specifications as its dimensions (4-1/2 inches by 7/8 inches).

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7100094358 | 3M™ Cubitron™ II Flap Disc 967A

UPC 00051125868556 | 3M™ Cubitron™ II Flap Disc 967A

Product Number 967A | 3M™ Cubitron™ II Flap Disc 967A

The Anatomy of a Versatile, Medium-Duty Disc

3M™ Cubitron™ II Flap Disc 967A – powered by 3M Precision-Shaped Grain and a poly-cotton backing – is well-suited for medium-duty applications including weld, scale and oxide removal, light deburring, surface preparation and blending. Along with the poly-cotton backing, this disc also features an incorporated grinding aid to help it run cool and cut efficiently on heat-sensitive metals. This all adds up to a disc that strikes a balance of fast cut and long life.

Flap Disc Design

Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.

Powered by 3M Precision-Shaped Grain

3M™ Cubitron™ II Flap Disc 967A features proprietary 3M Precision-Shaped – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.

Applications