3M™ Cubitron™ II Flap Disc 967A, 60+, T27 Quick Change, 4-1/2 in x 5/8"-11, Giant, 10 ea/Case

$10.17 / Each

SKU	7010327061
Legacy SKU	60440273682
UPC	00051141556338
Product Number	967A

3M Cubitron II Flap Disc 967A is ideal for medium-pressure applications on flat and contoured surfaces, especially in light deburring or weld leveling to prep for paint in mild steel. Its also great for stainless steel fabrication where finish and gouge resistance are important. Powered by 3M Precision-Shaped Grain, this disc cuts fast and lasts long.

Ideal 3M flap disc for medium-duty applications like weld removal and surface preparation
Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
Poly-cotton backing delivers controlled, even wear in medium unit pressure applications
Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
Easy to use, with less gouging than fiber discs and bonded wheels
Offers a great balance of fast cut and long life

Add to cart

Premium Deburring, Grinding and Finishing

For Right Angle Grinders

Long Lasting Performance

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	4.31599 lb
Length	8.85827 in
Width	5.74803 in
Height	6.14173 in

Color	Maroon
Maximum Speed	13,300 rpm

PRODUCT FAQ

What industries would benefit most from using the 3M™ Cubitron™ II Flap Disc 967A?

The 3M™ Cubitron™ II Flap Disc 967A is ideal for metalworking and is commonly used in industries such as aerospace, transportation, and fabrication.
Can you tell me more about the T27 Quick Change feature of this product?

Sure! The T27 Quick Change feature on the flap disc means that it can be easily and quickly switched out onto a compatible tool without requiring any additional tools to secure it.
How many discs come in a case of the 3M™ Cubitron™ II Flap Disc 967A, and what size are they?

There are ten (10) individual discs per case of the 3M™ Cubitron™ II Flap Disc 967A, each measuring at a diameter of four-and-a-half inches by five-eighths-inch -11 UNC thread.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7010327061 | 3M™ Cubitron™ II Flap Disc 967A

UPC 00051141556338 | 3M™ Cubitron™ II Flap Disc 967A

Product Number 967A | 3M™ Cubitron™ II Flap Disc 967A

The Anatomy of a Versatile, Medium-Duty Disc

3M™ Cubitron™ II Flap Disc 967A – powered by 3M Precision-Shaped Grain and a poly-cotton backing – is well-suited for medium-duty applications including weld, scale and oxide removal, light deburring, surface preparation and blending. Along with the poly-cotton backing, this disc also features an incorporated grinding aid to help it run cool and cut efficiently on heat-sensitive metals. This all adds up to a disc that strikes a balance of fast cut and long life.

Flap Disc Design

Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.

Powered by 3M Precision-Shaped Grain

3M™ Cubitron™ II Flap Disc 967A features proprietary 3M Precision-Shaped – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.

Applications