through rough waters
3M™ Thin Flexographic Pate Mounting Tape 2205FL, Translucent, 54 in x 60 yd, 5 mil, 1 Roll/Case, 3 inch Core
$1,824.10 / Roll
| SKU | 7100093147 |
|---|---|
| Legacy SKU | 70006776325 |
| UPC | 00076308982935 |
| Catalog Number | 2205FL |
| Product Number | 2205FL |
3M Thin Flexographic Mounting Tape 2205FL Translucent is a 5 mil, double coated film tape with differential acrylic adhesives on a polyester film carrier with a polycoated polyester liner. This tape is specifically designed for the corrugated printing segment to hold flexographic print plates to PVC saddles/carriers.
- 0.005 inch (0.13 mm) double coated tape is designed for the corrugated printing business to hold flexographic print plates to PVC carriers/saddles
- Linered side of the tape is designed for mounting to the carrier and has the air release feature allowing air to escape from between the tape and the carrier
- Non-linered side of the tape is designed for mounting to photopolymer plates
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Excellent holding power on-press with high plateside adhesion
- Clean plate removal when demounting or repositioning
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Thickness | 5 mil |
Shipping Dimensions |
|
| Weight | 44.29087 lb |
|---|---|
| Length | 58.11024 in |
| Width | 8.4252 in |
| Height | 8.4252 in |
| Color | Transparent |
|---|
PRODUCT FAQ
-
What is the width of 3M's Thin Flexographic Plate Mounting Tape 2205FL?
The width of our Thin Flexographic Plate Mounting Tape 2205FL is 54 inches.
-
How much tape can we expect from one purchase?
One roll of our Thin Flexographic Plate Mounting Tape 2205FL will provide you with a total of 60 yards in length.
-
Is this tape easy to use and wind onto a press cylinder?
Yes, it is! Our Thin Flexographic Plate Mounting Tape has been designed with an excellent balance between strength and stretchability, making application easy for all users.
3M™ Thin Flexographic Mounting Tape 2205FL Translucent is a high-quality adhesive designed to provide strong holding power and easy removal from both the plate and the carrier. This product uses the 3M easy mount liner, which creates micro-channels on the linered-side adhesive surface. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and the carrier.
Recommended Applications- Mounting flexographic corrugated post print plates to PVC saddles/carriers
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, rely on 3M for solutions and service throughout an operation.