through rough waters
3M™ Thin Flexographic Plate Mounting Tape 2205FL, Translucent, 54 in x 60 yd, 5 mil, 1 Roll/Case
$1,010.72 / Roll
| SKU | 7000049576 |
|---|---|
| Legacy SKU | 70006709490 |
| UPC | 00051111923504 |
| Catalog Number | 2205FL |
| Product Number | 2205FL |
3M Thin Flexographic Mounting Tape 2205FL Translucent is a 5 mil, double coated film tape with differential acrylic adhesives on a polyester film carrier with a polycoated polyester liner. This tape is specifically designed for the corrugated printing segment to hold flexographic print plates to PVC saddles/carriers.
- 0.005 inch (0.13 mm) double coated tape is designed for the corrugated printing business to hold flexographic print plates to PVC carriers/saddles
- Linered side of the tape is designed for mounting to the carrier and has the air release feature allowing air to escape from between the tape and the carrier
- Non-linered side of the tape is designed for mounting to photopolymer plates
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Excellent holding power on-press with high plateside adhesion
- Clean plate removal when demounting or repositioning
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Thickness | 5 mil |
Shipping Dimensions |
|
| Weight | 69.79394 lb |
|---|---|
| Length | 11.29921 in |
| Width | 11.29921 in |
| Height | 55.98425 in |
| Color | Transparent |
|---|
PRODUCT FAQ
-
What is 3M™ Thin Flexographic Plate Mounting Tape 2205FL used for?
3M™ Thin Flexographic Plate Mounting Tape 2205FL is designed to provide a high quality printing performance in flexo plate mounting applications.
-
How wide and long is this tape?
This particular tape measures at a width of 54 inches and has a length of 60 yards.
-
Is this tape easy to handle and apply?
Yes, the flexible film carrier allows for easy handling while also conforming well to curves and contours. It also features our proprietary adhesive technology which allows for good adhesion even on low-energy surfaces.
-
Can the translucent properties affect my print job?
The translucency feature works as an advantage since it enables better alignment with graphic images when proofing press sheets or registration marks without interference from tape backing colors or shadows.
-
Does it come in multiple rolls per case or just one?
. Each case comes with only one roll of tape measuring at dimensions of; Translucent, Width - (54in/1371mm), Length - (60yd/54.8m), Thickness - (5mil/0.127mm).
3M™ Thin Flexographic Mounting Tape 2205FL Translucent is a high-quality adhesive designed to provide strong holding power and easy removal from both the plate and the carrier. This product uses the 3M easy mount liner, which creates micro-channels on the linered-side adhesive surface. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and the carrier.
Recommended Applications- Mounting flexographic corrugated post print plates to PVC saddles/carriers
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, rely on 3M for solutions and service throughout an operation.