through rough waters
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005, Black, 490 mL Duo-Pak, 6/case
$332.52 / Each
| SKU | 7100089476 |
|---|---|
| Legacy SKU | 62277936308 |
| UPC | 00051128992982 |
| Catalog Number | 8005 |
| Product Number | 8005 |
3M Scotch-Weld Structural Plastic Adhesive DP8005 Black is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.
- Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
- Resists many chemicals, water, humidity and corrosion
- Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics composites and metals
- Medium viscosity allows controlled dispensing
- 3 minute work life with 3 hours handling strength
- Strong adhesive can replace screws, rivets and welding
Product Dimensions |
Imperial | Metric |
| Weight | 1.53883 lbs | |
|---|---|---|
| Width | 3-1/2 in | |
| Length | 3.9 in | |
| Height | 9 in |
Shipping Dimensions |
|
| Weight | 9.99796 lb |
|---|---|
| Length | 8.46457 in |
| Width | 7.99213 in |
| Height | 9.72441 in |
PRODUCT FAQ
-
What is the main use of 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005?
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 is mainly used in bonding metals, composites and plastics. It has strong holding power and can be used for structural bonding.
-
How does this adhesive work?
The 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 works by being applied to a clean surface of material and then pressing it to the other substrate. The bond strength will increase over time as the product fully cures.
-
Is this available in any other colors or sizes?
Yes, 3M offers this adhesive in various sizes ranging from small tubes up to larger dispense containers as well as additional colours such as clear. Please reach out to us if you need help determining which adhesive size or color may be best for your application!
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 is a reliable adhesive that can be used with Duo-Pak (DP) size adhesive for convenient and accurate metering, mixing, and dispensing. This adhesive creates a strong bond on low surface energy plastics without the need for special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. To prepare the surfaces, simply wipe them with isopropanol to remove mold release agents, dust, dirt, etc. This adhesive can bond metals, ceramics, wood, and most other plastics. It is also formulated with 8 mil spacer beads for bond line spacing.
Recommended Applications:
- Joining plastics to metals, such as in the manufacture or repair of appliances
- Bonding low surface energy plastics without priming
- Impact resistance composite bonding
- Manufacture or repair of various sporting goods equipment
- Low surface energy plastics such as polypropylene, polyethylene, and thermoplastic elastomers (TPEs)
The medium viscosity of 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 allows for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 3-minute work life. The adhesive reaches handling strength in approximately 3 hours and is fully cured in 24 hours (at 72° F/22° C). This adhesive is easy to use with acrylic and bonds LSE plastics without priming or other surface treatments. Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Although often referred to as epoxy adhesives or epoxy glue, acrylics belong to a separate chemical family with their own unique characteristics.
