through rough waters
3M™ Tabbing and Splicing Tape 5699, Clear, 0.10 mm, 7 in x 72 yd
$244.53 / Roll
| SKU | 7010414038 |
|---|---|
| Legacy SKU | 75347262356 |
| UPC | 00051115555831 |
| Product Number | 5699 |
3M Tabbing and Splicing Tape 5699, Clear, 0.10 mm is designed for use with 3M Acrylic Plus Tapes. It consists of a silicone adhesive on a polyester backing.
- Silicone adhesive applied to a polyester backing
- Provides a reliable means of liner removal in the production environment
- Recommended for use with 3M™ Acrylic Plus Tapes
- Tape may be used for either tabbing or splicing applications
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Thickness | 0.004 in | 0.1 mm |
Shipping Dimensions |
|
| Weight | 4.19981 lb |
|---|---|
| Length | 8.30709 in |
| Width | 8.30709 in |
| Height | 8.58268 in |
| Color | Transparent |
|---|
PRODUCT FAQ
-
What is the size of the 3M™ Tabbing and Splicing Tape 5699?
The tape measures 7 inches by 72 yards.
-
Can you tell me more about its color?
Sure! The tape is clear in color.
-
What is this particular tape primarily used for?
This tabbing and splicing tape can be used in a wide range of applications including attaching pages together, sealing packets and light cartons.
-
. Is it easy to use?
. Yes! It has excellent holding power and clean removability which makes it very user-friendly.
Recommended for Liner Removal
3M™ Tabbing and Splicing Tape 5699, Clear, 0.10 mm is a pressure sensitive adhesive backed film that provides a strong bond to 3M™ Acrylic Plus Tapes. The tape provides a reliable means of liner removal in a production environment. This tape provides high tack and good strength to liners and can be used for manual applications without special equipment.
Specifications
3M™ Tabbing Tapes are available in standard widths up to a maximum of 1200 mm (48 inches) in increments of 3.2 mm (1/8 inches). Length tolerance on all widths is ± 0.8 mm (1/32 inches).
Recommendations for Use
- Ensure the tape liner edge is cut square before tabbing the tape so the tab makes contact with the leading edge of the liner. Also, tabs perform better if they are positioned at an angle over the corner.
- For best results, tabs made with 3M™ Tabbing and Splicing Tape 5699 should be left for at least 24 hours at room temperature after lamination.
- 3M™ Tabbing and Splicing Tape 5699 can be used to produce undertabs (by placing the tab between the liner and tape), resulting in a more robust tabbing solution.
