through rough waters
Scotch-Brite™ Cut and Polish Wheel, CP-WL, 5A Fine, 12 in x 2 in x 5 in, 1 ea/Case
$396.37 / Each
| SKU | 7010365888 |
|---|---|
| Legacy SKU | 61873154035 |
| UPC | 00048011029696 |
| Product Number | CP-WL |
Scotch-Brite Cut and Polish Wheels are built for aggressive blending and finishing applications. Harder than other finishing wheels, Cut and Polish Wheels are good for defect removal or heavy scratch blending and produces a finish with a tight scratch pattern.
- Made with Aluminum Oxide mineral, which provides an aggressive cut for heavy duty blending and finishing
- Non-woven web construction helps resist premature loading, contributing to longer service life
- Good replacement for rubber bonded wheel
- Ideal for aggressive blending and finishing
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Center Hole Diameter | 5 in | 127.0 mm |
Shipping Dimensions |
|
| Weight | 4.09398 lb |
|---|---|
| Length | 12.4 in |
| Width | 12.4 in |
| Height | 2.6 in |
| Color | Tan |
|---|---|
| Maximum Speed | 3,000 rpm |
PRODUCT FAQ
-
What is the 3M Scotch-Brite Cut and Polish Wheel made of?
The wheel is made of tough, layered non-woven material filled with fine-grade silicon carbide abrasive grains.
-
What types of metals can this wheel be used on?
This versatile wheel can be used on a range of metals, including stainless steel, aluminum, brass and copper.
-
Is the CP-WL 5A Fine suitable for heavy-duty polishing jobs?
The CP-WL 5A Fine is ideal for final finishing and light deburring jobs. It may not be suitable for very heavy-duty or aggressive metalworking tasks that require more pressure or grinding power.
-
Can I use water as a lubricant while using the Cut and Polish Wheel?
Yes! The non-woven construction resists loading even at high-pressure repeated usage when applied with water or liquid detergents which make it convenient to use in wet applications as well.What's more the open web construction ensures adequate air flow to dislodge swarf thereby reducing clogging episodes preserving longevity
-
Is there any specific safety advice I should follow when using this product?
For your safety wear appropriate personal protective equipment such as glasses/goggles , face shields etc.Also read instructions carefully before usage .Ensure work area is clear off trip hazards & frayed edges influencing trips/falls over rotating tools like these.Use hand gloves.This will help you avoid cutting yourself by sharp burrs from unfinished metallic surfaces being polished
Scotch-Brite™ Cut and Polish Wheels use aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Cut and Polish Wheels help to remove surface defects and coarse grindlines, blend forging marks and machining mismatches while leaving a uniform grain finish. These wheels are available in a range of diameters and widths and can be used with robotics, inline sanders, bench motors, backstands and centerless grinders.
