3M™ Hookit™ Microfinishing Film Disc 268L, 40 Mic 3MIL, Type D, 5 in x NH, D/F 5HL, Die 500FH, 25/Bag, 500 ea/Case

$1.11 / Each

SKU	7010325355
Legacy SKU	60020002808
UPC	00051111545416
Product Number	268L

3M Hookit Microfinishing Film Disc 268L is a fast-cutting abrasive for precise, uniform, close-tolerance finishes. An aluminum oxide mineral is resin-bonded to a 3 MIL, high-strength polyester film backing for durability. This disc is ideal for defect repair and leveling, paint prep and final finishing.

Micron-graded aluminum oxide delivers close tolerance precision finishes
Water-resistant polyester film backing for wet or dry applications
Hook and loop backing for easy tool attachment and re-use
Color coded for ease of selection and reduced risk of error
High-strength polyester film backing resin-bonded for durability

Add to cart

High-Quality Surface Finishes

Reduces Abrasive Costs

Long Lasting Performance

Fantastic Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	6.60946 lb
Length	12.00787 in
Width	12.00787 in
Height	7.00787 in

Color	Blue

PRODUCT FAQ

What is the size and quantity of the 3M™ Hookit™ Microfinishing Film Disc 268L, 40 Mic, Type D?

The disc has a size of 5 in x NH and comes in a case with die 500FH. There are total of 500 discs per case.
Can you tell me more about the compatibility of this product?

This microfinishing film disc is compatible with hook-and-loop attachment systems which makes for easy change-outs and allows for repeated use. It's ideal for automotive aftermarket applications as well as woodworking, metalworking, paint preparation, and various composite constructions.
Are there any specific instructions on how to properly use this product?

For best results when using the microfinishing film disc keep your tools clean - debris from tools may cause damage to the surface being finished. Also apply enough pressure without pressing too hard – let these films do their job effectively - take it slow. Make sure not to exceed maximum operating speeds allocated by machinery manufacturer – follow instructions/directions provided by equipment manufacturers carefully.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7010325355 | 3M™ Hookit™ Microfinishing Film Disc 268L

UPC 00051111545416 | 3M™ Hookit™ Microfinishing Film Disc 268L

Product Number 268L | 3M™ Hookit™ Microfinishing Film Disc 268L

Achieve Close-Tolerance Finishes

3M™ Hookit™ Microfinishing Film Disc 268L is designed to enable operators to achieve precise, controlled, close-tolerance finishes on surfaces from metals to plastics to wood. This product features precision, micron-graded aluminum oxide, resin-bonded to a high-strength, resilient polyester film backing. Aluminum oxide is desirable among industrial professionals for its fast cut-rate and long life.

Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys. It cuts aggressively without significantly altering part geometry, which is great for applications like finishing and paint prep – when you want to maintain the part's original shape.

Available in a wide range of grades, these discs are color coded for easy selection of grit and reduced risk of error.

Run Wet or Dry

These film-backed discs are water resistant, so they can be run wet or dry. Coolant generally extends abrasive life, increases cut rate and prevents loading. The high- strength, film backing maintains its strength and flexibility when paper will degrade when run wet, which makes it an excellent choice for use on a variety of woods and automotive applications.

Focus on the Task, Not the Tool with Hookit™ Attachment

Microfinishing Film 268L utilizes 3M™ Hookit™ hook-and-loop attachment system which allows the operator to focus more on the task and less on tool. 3M™ Hookit™ products are manufactured with loop material that attaches to a backup pad (sold separately) where tiny hooks firmly engage the loops.

Attachment is quick, easy and secure. Sanding, finishing, and surface conditioning products with the hook-and-loop attachment and removal system are efficient for working through multi-step finishing processes and are ideal for environments where dust and debris is common. Abrasive products with a Hookit™ attachment can be used again and again for the life of the abrasive, unlike pressure-sensitive adhesive attachments.