3M™ Finesse-it™ PSA Film Disc Roll 466LA, A3 3MIL, 3/4 in x NH, Die 75K, 2000 Discs/Roll, 4 Rolls/Case

$629.25 / Roll

SKU	7000118622
Legacy SKU	60440139651
UPC	00051141206974
Product Number	466LA

3M Finesse-it PSA Film Disc Roll 466LA is 3Ms original microreplicated film disc frequently imitated, this technology helps remove surface imperfections from clearcoats, all without changing the surface topography.

THE ORIGINAL microreplicated film disc for clearcoat repair
CONSISTENT RESULTS as the abrasives reveal new cutting surfaces with each use
SAND WITH CONFIDENCE as the micro-structured silicon carbide cuts sharply, removing imperfections without gouging
GRADES AVAILABLE in A3, A5 and A7

Add to cart

High-Quality Surface Finishes

Reduces Abrasive Costs

Long Lasting Performance

Fantastic Price

Product Dimensions	Imperial	Metric
Weight	0.875 lbs
Width	7 in
Length	9-1/2 in
Height	11 in
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	4.00007 lb
Length	12.00787 in
Width	12.00787 in
Height	5.82677 in

Color	Light Green
Maximum Speed	10,000 rpm

PRODUCT FAQ

What is the diameter and backing material of the 3M™ Trizact™ Finesse-it™ Film Disc Roll 466LA?

The disc roll has a diameter of 0.75 inches and features a NH (no hole) design with Die 75K backing.
How many discs come in each roll, and how many rolls are in a case?

There are 2000 discs per roll, and four rolls available per case.
Can you tell me more about the abrasiveness level of this particular film disc?

Absolutely! This A3 rated product falls into a category of medium abrasive levels.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000118622 | 3M™ Finesse-it™ PSA Film Disc Roll 466LA

UPC 00051141206974 | 3M™ Finesse-it™ PSA Film Disc Roll 466LA

Product Number 466LA | 3M™ Finesse-it™ PSA Film Disc Roll 466LA

Fine Sanding and Finish of Automotive Coatings

3M™ Trizact™ Finesse-it™ Film Disc Roll 466LA is a clearcoat spot repair disc used by automotive manufacturers worldwide. It is available in three grades: A3, A5, and A7. These discs are designed for quick access and attachment to rotary tools or orbital sanders, and are available in a convenient roll form.

Silicon carbide, which is used in the production of these discs, produces a brighter finish and is commonly used for defect repair on clear coats, paint, and plastics. It can effectively refine these surfaces without significantly gouging or damaging the workpiece. Although it breaks down faster than aluminum oxide, it is still a preferred choice for many automotive manufacturers.

Recommended Applications

Machine Sanding

Level/remove the defect using the 3M™ Elite Series Mini Orbital Sander 28737 or the 3M™ Mini Random Orbital Nib Sander 20244 and a 3M™ Trizact™ Finesse-it™ 466LA disc
Spray the disc with water to prevent the abrasive from loading during sanding
Sand the defect for 1 to 3 seconds, depending on its size
Wipe the area clean with a Scotch-Brite™ High Performance Cloth

Hand Sanding

Level/remove the defect using a 3M™ Finesse-it™ Hand Pad and a 466LA disc
Spray the 466LA disc with water to prevent the abrasive from loading during sanding
Sand the defect for 3 to 5 seconds, depending on its size
Wipe the area clean with a Scotch-Brite™ High Performance Cloth

Automotive Finishes

Remove small defects with a 466LA A5 disc. Sand in a circular motion, holding the pad flat to ensure a fine uniform finish.

3M™ Science. Precision Finishing by Design.

3M™ Trizact™ structured abrasives are precisely shaped engineered composites evenly distributed and bonded to an abrasive backing. These extremely uniform abrasive structures can take the form of almost any three-dimensional geometric shape, including pyramids, hemispheres, and cubes, designed to enhance grinding performance. Trizact™ abrasives are identical in height and orientation, wearing just as uniformly. As they do so, fresh, sharp mineral is exposed to produce a consistent cut and a predictable, fine finish. This means fewer rejects and less rework due to out of spec results. Ongoing sharp cutting action minimizes the need to incorporate other abrasives in the sequence, thereby reducing processing steps and enhancing productivity.

In addition to high-performance abrasives, 3M microreplication technology is also used in the manufacture of a variety of 3M products such as overhead projector lenses, reflective traffic signs, and solar optical films. It's science, making your world smoother and brighter.