3M™ Hookit™ Paper Disc 216U, P600 A-weight, 6 in x NH, Die 600Z,100/Pac, 500 ea/Case

$0.88 / Each

SKU	7000118168
Legacy SKU	60010024911
UPC	00051111608234
Product Number	216U

3M Hookit Gold Paper Disc 216U is constructed of aluminum oxide on a light-weight paper backing and is suitable for finishing applications with a random orbital sander on wood as well as primer, paint, sealers, topcoats, fiberglass, and plastics. Open coat construction and a load-resistant coating help prevent clogging of the disc to optimize cut and prolong disc life.

3M™ Hookit™ discs are easy to change and reuse, maximizing utility for the life of the disc
Aluminum oxide mineral is durable, cuts fast, and performs well on many surfaces
Open coat helps to reduce loading
Light A-weight paper backing is suitable for finishing
Load-resistant coating prevents clogging to optimize cut and disc life

Add to cart

Superior Cut Rate

Durable

Custom Fit

Can Use on Many Surfaces

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Diameter	6 in	152.4 mm
Center Hole Diameter	0 NP

Shipping Dimensions
Weight	8.37007 lb
Length	11.29921 in
Width	6.88976 in
Height	7.28346 in

Color	Gold
Maximum Speed	12,000 rpm

PRODUCT FAQ

What is the size of 3M™ Hookit™ Paper Disc 216U?

The size of 3M™ Hookit™ Paper Disc 216U is 6 inches x NH.
What is the grit of this paper disc?

The P600 A-weight grit has been used in this paper disc.
How many discs are there per inner pack and case?

There are 100 discs per inner pack, and a total of 500 discs in a single case.
Can I use it for wet applications also?

Yes, You can use it for wet sanding as well as dry sanding.
.: Is there any particular application that these discs are preferred over other types of sandpaper/discs available on market ?

.: These Hard working abrasive earrings from hookit (TM) cleaning and polishing disc have been designed to work best with paint preparation, body primer/gel coats finishes , metal surfaces etc which makes them ideal solution for professionals who need high-performance abrasives .

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000118168 | 3M™ Hookit™ Paper Disc 216U

The 3M™ Hookit™ Sandpaper Discs

The 3M™ Hookit™ (hook-and-loop) attachment system is designed to make disc changes fast and easy. This means that the disc can be used again and again for the extent of the abrasive life.

Open coat construction is used to ensure that the abrasive grains are placed with space between them. This helps to evacuate sanding dust and avoid clogging the cutting edge of the grains. The load-resistant coating also allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability. Together with the 3M™ Hookit™ backing, these features add up to increased productivity and reduced material consumption.

These discs feature an aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.

Fast and easy disc changes with the 3M™ Hookit™ attachment system
Open coat construction helps to evacuate sanding dust and avoid clogging the cutting edge of the grains
Load-resistant coating allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability
Aluminum oxide abrasive is a popular choice among industrial professionals because of its fast cut-rate and long life
Suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys