through rough waters
3M™ Thin Flexographic Mounting Tape 2205, Translucent, 36 in x 60 yd, 5 mil, 1 Roll/Case
$1,215.67 / Roll
| SKU | 7000049334 |
|---|---|
| Legacy SKU | 70006450608 |
| UPC | 50051115321523 |
| Catalog Number | 2205 |
| Product Number | 2205 |
3M Thin Flexographic Mounting Tape 2205 is a 5 mil, double coated film tape with differential acrylic adhesives on a polyester film carrier with a polycoated kraft paper liner. This tape is specifically designed for the corrugated printing business to hold flexographic print plates to PVC saddles/carriers.
- 0.005 inch (0.13 mm) double-coated tape designed for the corrugated printing business to hold flexographic print plates to PVC carriers/saddles and PET carriers/saddles
- Linered side of the tape has crosshatched pattern that allows air to escape from between the tape and the carrier
- Adhesive on non-linered side of the tape is designed for mounting of photopolymer plates
- Excellent holding power on-press with high plate side adhesion
- Embossed polycoated kraft (PCK) paper liner
- Clean plate removal when demounting or repositioning
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Thickness | 5 mil |
Shipping Dimensions |
|
| Weight | 55.00093 lb |
|---|---|
| Length | 11.29921 in |
| Width | 11.29921 in |
| Height | 37.99213 in |
| Color | Transparent |
|---|
PRODUCT FAQ
-
What is 3M™ Thin Flexographic Mounting Tape 2205?
3M™ Thin Flexographic Mounting Tape 2205 is a translucent, double coated tape designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeves.
-
What are the dimensions of each roll of the tape?
Each roll of the tape measures 36 inches wide by 60 yards long with a thickness of 5 mils.
-
How many rolls come in a case?
The product comes as one roll per case, which makes it convenient for handling and storage.
-
Is this product easy to handle when applying on a surface?
Yes! Thanks to its thinness, you can easily cut or die-cut these tapes precisely. Additionally, the adhesive system has good adhesion properties that provide excellent holding power even in cold environments.
-
Is there any special requirement in storing this tape after purchase?
. Ideally store this at room temperature out of direct sunlight and away from moisture sources that may damage or degrade its performance over time. This will ensure maximum shelf life so they remain fresh until their next use.
3M™ Thin Flexographic Mounting Tape 2205 is a high-quality mounting tape that features the innovative 3M air release liner. Unlike other mounting tapes that use a pebbled or flat release liner, the 3M air release liner has a crosshatched pattern that imprints unique micro-channels into the easy mount adhesive. This allows entrapped air to escape, resulting in virtually bubble-free mounting.
With 3M™ Thin Flexographic Mounting Tape 2205, air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder. This makes setup faster and provides smoother surfaces for cleaner print quality and higher productivity. Additionally, the adhesive maintains tight contact with reduced edge lifting.
Recommended Applications- Mounting flexographic corrugated post print plates to PVC saddles/carriers and PET saddles/carriers
For decades, 3M products have been at work in printing plants, helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on 3M for solutions and service throughout an operation. Keep the presses running and your customers coming back with 3M™ Thin Flexographic Mounting Tape 2205.