3M™ Stikit™ Gold Paper Disc Roll 216U, 01622, P240 A-weight, 5 in x NH, D/F 5HL, Die 500FH, 175 Discs/Roll, 6 Rolls/Case

$91.21 / Roll

SKU	7000043524
Legacy SKU	60010014003
UPC	00051131016224
Product Number	216U

The 3M Stikit Gold Paper Disc Roll 216U is designed for convenience, combining open coat aluminum oxide discs with a handy adhesive backing ready for easy attachment to a Stikit backup pad (sold separately). This disc roll makes the discs easy to grab while eliminating the use of disc liners.

Convenient roll form means no liners to remove, increasing productivity
Aluminum oxide mineral is durable, cuts fast, and performs well on many surfaces
A-weight light paper backing is suitable for finishing applications
Open coat construction minimizes dust on the abrasive and workpiece for increased productivity
Load-resistant coating helps prevent premature loading of the disc surface to maximize cut and extend the life of the abrasive grains

Add to cart

Superior Cut Rate

Durable

Custom Fit

Can Use on Many Surfaces

Product Dimensions	Imperial	Metric
Weight	1.15081 lbs
Width	3-1/2 in
Length	3-1/2 in
Height	6 in
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	7.74925 lb
Length	12.9 in
Width	10.9 in
Height	4.3 in

Color	Gold
Maximum Speed	12,000 rpm

PRODUCT FAQ

What is the grit size of the 3M™ Stikit™ Gold Paper Disc Roll 216U, 01622?

The grit size of this paper disc roll is P240.
What is included in one roll and how many rolls are there in one case of 3M™ Stikit™ Gold Paper Disc Roll 216U, 01622?

One roll comes with as many as 175 discs. With each case containing six rolls, you get a total of around 1050 discs!
Can you tell me more about the specifications or features of the product such as D/F5HL dies used for its construction?

Yes! The dimensions (D/F) used for these discs' construction are Diameter / Flatness which measure at a range of five ten-thousandths (.0005) inches; while HL denotes milled tolerance using datum plates wrapped into an arc measurement. Moreover, every die has been checked by classic light interference methods to ensure high standards among all design factors that may affect their performance upon production completion.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000043524 | 3M™ Stikit™ Gold Paper Disc Roll 216U

UPC 00051131016224 | 3M™ Stikit™ Gold Paper Disc Roll 216U

Product Number 216U | 3M™ Stikit™ Gold Paper Disc Roll 216U

Product Description: 3M™ Stikit™ Gold Paper Disc Roll 216U

3M™ Stikit™ Gold Paper Disc Roll 216U is a high-quality, coated abrasive product designed for use with a random orbital sander. The discs are made of long-lasting aluminum oxide abrasive grains on a light A-weight paper backing suitable for lightweight sanding and finishing.

The open coat and load-resistant coating help prevent loading for a longer service life, making 3M™ Stikit™ Gold Paper Disc Roll 216U discs well-suited for general sanding and finishing applications on a variety of substrates, including paint, primer, wood, metal, plastic, and composites, including fiberglass.

These discs come ready to use with a pressure sensitive adhesive coating on the backside, which allows them to conveniently press on to the backup pad and remove cleanly, leaving an uncontaminated surface for the next disc. A Stikit disc should be used in conjunction with a Stikit backup pad (also called a disc pad and sold separately) that is attached to a random orbital sander.

Loading occurs when wood or paint dust clogs the surface of the disc and the abrasive points, which can quickly make the disc ineffective. Open coat construction means the abrasive grains are spaced so that dust and debris can collect in the spaces rather than loading the disc. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade, for faster results.

3M™ Stikit™ discs are designed to handle a wide range of sanding and finishing needs.

Long-lasting aluminum oxide abrasive grains
Light A-weight paper backing suitable for lightweight sanding and finishing
Open coat and load-resistant coating help prevent loading for a longer service life
Well-suited for general sanding and finishing applications on a variety of substrates
Pressure sensitive adhesive coating on the backside for easy use
Open coat construction prevents loading and provides a more aggressive cut for faster results