through rough waters
3M™ Thermally Conductive Acrylic Interface Pad 5589H-10, 240 mm x 1 mm x 20 m, 1 per Case
$904.06 / Roll
| SKU | 7100204965 |
|---|---|
| Legacy SKU | JT940004859;JT940011 |
| UPC | 04549395884056 |
| Catalog Number | 5589H |
| Product Number | 5589H-10 |
3M Thermally Conductive Acrylic Interface Pad 5590H is a moderately conformable and medium-soft pad with high thermal conductivity of 2.8 W/m-K (3M test method). This pad consists of a slightly tacky acrylic elastomeric sheet filled with thermally conductive ceramic particles. It is designed to transfer heat from heat generating components to heat sinks and cooling devices, improving device reliability and extending the component's life.
- Good softness and conformability to non-flat surfaces
- Excellent compressive stress relaxation
- Non-silicone acrylic elastomer
- Good dielectric performance
- Good surface tack leads to low thermal resistance at surface
- Thickness : 0.5 mm, 1.0 mm, 1.5 mm
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Thickness | 40 mil | 1.016 mm |
Shipping Dimensions |
|
| Weight | 22.7495 lb |
|---|---|
| Length | 10.23622 in |
| Width | 10.23622 in |
| Height | 11.41732 in |
PRODUCT FAQ
-
What is the 3M™ Thermally Conductive Acrylic Interface Pad 5589H-10 used for?
The 3M™ Thermally Conductive Acrylic Interface Pad 5589H-10 provides a thermal interface between heat-generating components and heat sinks or other cooling devices.
-
How thick is the pad in millimeters, and how long is each roll of pad material?
The pad thickness measures .01 inches or roughly .25 millimeters. Each roll contains approximately 65 feet (20 meters) of pad material.
-
How do I apply the thermally conductive acrylic interface pad correctly?
First clean both surfaces that will come into contact with the interface pad to remove any residue. Then cut out a piece of the desired size from the roll. Remove one side protective liner first, then press it on to your device making sure no air bubbles form. Next, gently remove the second protective liner and carefully place heatsink on top aligning pads as needed."
3M™ Thermally Conductive Acrylic Interface Pad 5590H has a medium-soft pad that conforms to uneven substrates, providing excellent wettability to fill gaps for improved thermal performance.
The thin, firm, low-tack layer provides easy handling for pre-assembly and die-cutting. This pad provides robust thermal management for applications in a variety of market segments, such as consumer electronics, automotive, LED lighting, medical devices, communication infrastructure, and aerospace & defense.
Our family of 3M™ Thermally Conductive Acrylic Interface Pads provide low-outgassing and high-performance solutions compared to silicone. These acrylic pads have no siloxane VOC or oil bleeding, which are associated with silicone products and can often cause device failure. They are lightweight, making them ideal for applications with finer spacing requirements and a small footprint. 3M™ Thermally Conductive Acrylic Interface Pads have good electrical insulation properties to protect against electrical interference and device breakdown.
Recommended Applications:
- Heat transfer between PCB and heat sink
- Decrease of compression stress to electronic parts by thermal pad softness
- Gap filling in electronic devices
- Chip on film (COF) heat dissipation
- Power electronic component thermal management
Examples:
- LED displays
- Electric vehicle (EV) batteries
- Wireless charging units
- Satellite navigation
- Sensors
- Process control equipment
- Test & measurement devices
