3M™ Wetordry™ Cloth Disc 281W, 5 in x NH, 2 Tabs, P800, 50/Pac, 250 ea/Case

$1.52 / Each

SKU	7100192040
Legacy SKU	60440319691
UPC	00638060382196
Product Number	281W

3M Wetordry Cloth Disc 281W features a strong, waterproof mesh type cloth backing so the abrasive may be run wet or dry. It is commonly used for finishing on substrates like paint, e-coat primer, gel coat and metal. Discs clip on to a hand pad (sold separately) for hand applications.

Unique mesh cloth helps prevent loading
Versatile cloth may be run wet or dry
May be used for finishing on e-coat primer, gel coat, and metal
Features aluminum oxide mineral for sharp cuts and fine finishes
Abrasive may be attached to a hand or backup pad with clamps/clips
Available in a range of sizes and grades to suit unique project needs

Add to cart

Multi-Functional

Long-Life Performance

Custom Fit

Fast Cut Rate

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	3.922 lb
Length	11.3 in
Width	5.9 in
Height	6.3 in

Maximum Speed	0 NP

PRODUCT FAQ

What is the size of 3M™ Wetordry™ Cloth Disc 281W, and how many tabs does it have?

The size of this cloth disc is 5 inches x NH (no hole), and it has two tabs.
Can you tell me what P800 means in regards to this product?

P800 refers to the grit or coarseness level of the disc. In this case, P800 represents a medium grit level.
How many discs come per inner and per case?

There are 50 discs included in one inner pack, and there are 250 total discs included in one case purchase.
Is the Wetordry™ Cloth Disc suitable for both wet and dry sanding applications?

Yes! This cloth disc can be used for both wet and dry sanding applications, making it very versatile.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7100192040 | 3M™ Wetordry™ Cloth Disc 281W

Use Wet or Dry

3M™ Wetordry™ Cloth Disc 281W is a versatile cloth product that can be used wet or dry for finishing metal and gel coats. When used with water, it prevents loading of the abrasive during the finishing process, preventing dust and debris from clogging the abrasive and dulling the mineral. This makes it ideal for use on e-coat primer and in the marine industry for sanding old finishes, fine feather edging, and surface work.

The cloth disc is made with aluminum oxide mineral, which is known for its fast cut-rate and long life. It is tough and durable, self-fracturing to expose fresh cutting edges. This makes it suitable for a wide variety of materials in both metalworking and the marine/fiberglass markets.

The Benefits of Cloth-Backed Discs

3M™ Wetordry™ products are engineered with a waterproof cloth backing, which supports both wet and dry applications. Wet applications tend to produce a significant amount of dust, clogging the abrasive points and creating an inferior work environment. However, sanding with water can rinse dust away from the workpiece and abrasive surface, minimizing these effects.

Having a water-resistant abrasive can be useful when finishing materials like paint and primer, which tend to generate a lot of debris. Pairing 3M™ Wetordry™ Cloth 281W with water can keep both the abrasive and workpiece clean and produce the soft finish that industrial professionals desire.

Add to cart