3M™ Diamond Microfinishing Film PSA Disc 675L, 45 Mic, 3 in x 1/2 in, Die 300DN, 100/Bag, 1000 ea/Case

$3.20 / Each

SKU	7100189485
Legacy SKU	60440355273
UPC	00638060061640
Product Number	675L

Designed with a strong polyester film backing and sharp diamond mineral, 3M Diamond Microfinishing Film 675L delivers fine finishes on hard metals, thermal spray coating, ceramics, carbides, chilled iron and granite.

Micron-graded diamond mineral delivers close tolerance precision finishes
Great for medium stock removal
May be run wet or dry
Color-coded by grade to reduce risk for error
Available in a range of grades, so operators can choose the right disc for their unique application

Add to cart

High-Quality Surface Finishes

Reduces Abrasive Costs

Long Lasting Performance

Fantastic Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	5.5821 lb
Length	10 in
Width	10 in
Height	6.41732 in

PRODUCT FAQ

What is the 3M™ Diamond Microfinishing PSA Film Disc 675L made of?

The disc is made using a premium, micron-graded diamond abrasive bonded to a polyester film backing with a pressure-sensitive adhesive.
What are some applications for this product?

This product can be used for microfinishing aluminum oxide, glass beads and stainless steel.
How long do these discs typically last?

The performance of each disc will vary based on factors like material type, aggressiveness level required, and grit size selected. However, our customers have told us that they typically get good life out of each disc.
Are there different sizes or grits available for this product?

Yes! We offer a range of sizes from 1" up to 8", as well as a variety of different grits/bond types depending on your application needs. Please reach out if you need assistance selecting the right option for your specific project.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7100189485 | 3M™ Diamond Microfinishing Film PSA Disc 675L

Diamond Mineral: Sharp Cut, Fine Finishes

3M™ Diamond Microfinishing Film PSA Disc 675L is a disc designed for fast finish reduction on hard materials. It is an efficient option for removing thermal spray coatings, ceramics, carbides, chilled iron, and granite. This disc is commonly used in the transportation, general industrial, precision grinding and finishing, and aerospace industries.

Diamond mineral is known for its sharp cut and fine finishes when moderate to medium pressure is applied. It is a great option for tough coating and hard to grind material removal. The disc is available in grades 125 and 74 micron to refine thermal sprayed surfaces and 45, 30, 20, and 9 micron for finer finishes. Operators can choose a disc that's tailored to their unique project needs.

The polyester backing on 3M™ Microfinishing PSA Film Disc 675L is water-resistant, so the disc may be run wet if desired. Adding a lubricant like water can help minimize build-up and wash away swarf, which prevents the abrasive from getting clogged. It helps keep the abrasive cut sharp and run cool.

A pressure-sensitive adhesive (PSA) backing was engineered in the design of 675L, so disc to tool attachment would be swift and easy. The PSA backing holds the disc securely in place during use and removes cleanly from the backup pad (sold separately), leaving an uncontaminated surface for the next disc. It's designed for use with orbital and random orbital sanders.

Overall, this micron-graded diamond abrasive delivers the desired finish without compromising the integrity of the substrate. Its strength and versatility make it a great disc for finishing.

Add to cart