Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc, XC-DC, A/O Extra Coarse, Green, 4-1/2 in x 5/8 in-11, Type 27, 10 ea/Case

$13.57 / Each

SKU	7100175520
Legacy SKU	61500303120
UPC	00638060210505
Product Number	XC-DC

Scotch-Brite Clean and Strip XT Pro Extra Cut Disc features aluminum oxide abrasive mineral incorporated into an open nylon web. It is designed to remove heavy rust, thick paint and corrosion while also scratching the base material underneath, which can save you time. The highly conformable, high-strength fibers resist chunking and loading, and they perform well on edges.

RAPID COATING REMOVAL AND SURFACE PREP: Quickly removes heavy rust, thick paint, corrosion and cleans welds
RAPID COATING REMOVAL AND SURFACE PREP: Quickly removes heavy rust, thick paint, corrosion and cleans welds
FASTER REMOVAL RATES: High conformability provides a larger contact patch for faster removal rates, enhancing productivity
CONFORMABLE, HIGH-STRENGTH FIBERS: High-strength fiber resists chunking and performs well on edges
CONSISTENT CUT OVER TIME: Open nylon web resists loading for consistent cutting action
PERFORMANCE WITHOUT COMPROMISE: Higher cut rate, longer life, low vibration and low spark

Add to cart

Multi-Functional

Versatile Across Industries

Easy To Use

Fantastic Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Diameter	4-1/2 in	114.3 mm
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	3.0501 lb
Length	9.48819 in
Width	6.61417 in
Height	6.88976 in

Color	Green
Maximum Speed	13,300 rpm

PRODUCT FAQ

What surfaces are ideal for use with the Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc?

The Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc is ideal for removing heavy rust, thick coatings, and corrosion on metal surfaces such as steel or iron.
How long does each disc last before it needs to be replaced?

The lifespan of each disc can vary depending on the level of abrasiveness needed. However, one piece can last longer than others in the market due to its long-lasting sharpness.
Why should I consider using the extra cut version over other options available?

The extra cut version features a denser concentration of abrasive minerals that are perfect for applications where a finer grit is not possible. This makes it faster at removing unwanted substances from surfaces like hard metals
Can I use this product without an angle grinder?

No. You need an angle grinder with a 5/8"-11 spindle thread since this type II category;it must only be used under operating conditions which include protective guards to reduce risk of injury caused by wheel breakage

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7100175520 | Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc

UPC 00638060210505 | Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc

Product Number XC-DC | Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc

Take Advantage of High Conformability

Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc is designed with a reengineered fiber web that allows operators to take advantage of increased conformability without compromising strength. The disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.

The Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc offers low vibration, decreased chunking, a high speed rating and long life. This makes it a reliable disc that can be used with confidence on your angle grinder.

Save Time with Aluminum Oxide

The Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc is designed with aluminum oxide abrasive mineral that can remove heavy coatings and simultaneously scratch and clean to the bare metal underneath without leaving divots. This means that operators can remove a coating from a workpiece and get it ready for welding or adhesive application with the same disc – saving the time of switching abrasives.

Spongy Web, Sharp Mineral

The Scotch-Brite™ Clean and Strip XT Pro Extra Cut Disc is engineered by combining aluminum oxide mineral with non-woven nylon fibers using resin. Aluminum oxide is a very hard mineral that delivers a high cut rate, commonly used in high-pressure applications like cutting and weld removal. The resin bond strengthens the fiber web and allows it to gradually break down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive. The combination of fiber strands, resin and abrasive mineral forms a thick, open web. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.

Applications