3M™ PPS™ Series 2.0 Liners, 26240, Mini ( 6.8 fl oz, 200 mL), 8000 per pallet

Designed specifically for the 3M PPS Series 2.0, the next generation of the highest performing disposable spray cup system, the PPS Series 2.0 Liners are a perfect fit for the 3M PPS Series 2.0 Cups. These collapsible liners are designed to hold paint and other coatings during application. The cups accept PPS Series 2.0 Lids with fast and efficient quarter-turn locking systems, ensuring a secure lock between the lid and the cup. The clear access window on the cup makes it easy to grasp the liner, simplifying lid removal during tinting and refilling. After spraying, simply remove the liner and keep the cup for clean and cost-effective spray operations.

The liners are available in five different sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL), and 28oz (850mL). They can also be purchased as part of the 3M PPS Series 2.0 Lid & Liner Kits, which include a new reusable hard cup in each kit.

The 3M PPS Series 2.0 Spray Cup System is the latest and best-performing disposable spray cup system. This system has been redesigned from the connection to the cup, offering six improvements that provide a complete disposable spray cup solution for mixing/measuring, filtering, spraying, and temporary sealing and protection of sprayable coatings.

Every PPS Series 2.0 lid features a quarter-turn lid locking system, which helps reduce paint build-up and possible contamination. Each lid and liner kit also contains a new hard cup with universal mixing ratios built into the cup, eliminating the need for separate inserts and ensuring the most accurate mix possible.

The 3M PPS Series 2.0 makes it even easier to mix directly in the cup. The cups include a clear access window that allows you to see how much material is left while spraying, making it easier to hold the liner for cleaner lid removal. This feature is especially useful during refills or tinting.

The 3M PPS Series 2.0 Lids feature a domed geometry that allows up to 3oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. The lids also have a wider spout for improved fluid flow. Additionally, a built-in full-diameter filter delivers the highest quality filtration without the need for assembly.

The new adapter design of the PPS Series 2.0 provides a four-point connection and a wider 360 platform, ensuring a stable and reliable lid-to-spray-gun connection. The larger sealing plugs not only seal but can also be used as a base for temporary sealing and protecting, reducing the need for replacement lids and keeping the built-in filter wet.

Every lid in the PPS Series 2.0 features a built-in full-diameter filter, available in 200 micron or 125 micron mesh. It is important to consult the paint or coatings manufacturer for the recommended filter mesh size.

The PPS 2.0 Spray Cup System is available in five sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL), and 28oz (850mL). Using the right size cup for every repair not only reduces the cost per lid and liner but also reduces the likelihood of overmixing.

After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use, or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Cleaning the spray gun and the PPS Adapter requires only a small amount of solvent, with most guns being cleaned with less than 3oz of solvent. Shops using the PPS Series 2.0 often experience a 70% reduction in cleaning solvent usage.

Thanks to the closed system design of the PPS Series 2.0, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90 degrees to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray, and reduces paint consumption.

By using a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.

3M, the inventor of disposable cups for paint application, continues to reinvent based on customer feedback. The consistent performance of the 3M PPS System has earned the trust of experts in the paint application process. The PPS Series 2.0 is the result of more than 15 years of painter feedback and is a true next-generation all-in-one disposable painting system. It produces cleaner jobs, saves on paint consumption, and reduces solvent usage by up to 70%.