SKU | 7100148732 |
---|---|
Legacy SKU | 62278814363 |
UPC | 00638060089675 |
Catalog Number | 810 |
Product Number | 810 |
3M Scotch-Weld Low Odor Acrylic Adhesive DP810 Black is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M Scotch-Weld Acrylic Adhesive DP810 Black contributes to a safer work environment compared to typical acrylic adhesives.
- Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
- Provides high shear and peel strength and is toughened for impact resistance
- 10 minute work life and 20 minute handling strength
- Bonds oily metals with minimal surface prep
- Bonds most plastics, composites and metals
- Black version of the product
Product Dimensions |
Imperial | Metric |
Weight | 0.18 lbs | |
---|---|---|
Width | 4-1/2 in | |
Length | 1 in | |
Height | 1-3/4 in |
Shipping Dimensions |
|
Weight | 2.32 lb |
---|---|
Length | 6.08976 in |
Width | 4.62992 in |
Height | 5.32992 in |
PRODUCT FAQ
-
What is the size of the 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810, Black container?
The container size is 48.5 mL Duo-Pak, and each case contains 12 units.
-
Is the color of this adhesive black or transparent?
This particular adhesive variant is black in color.
-
Can you tell me more about its odor level compared to other adhesives?
Yes! Our 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 has a low odor rating compared to other similar acrylic adhesives. Plus, it provides excellent bonding strength on plastics and metals while maintaining a highly durable hold over time.
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides high shear and peel strength and is toughened for impact resistance. This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.
Recommended Applications:- Sporting goods (metal to metal, metal to plastic bonding)
- Appliance manufacturing (metal to metal, metal to glass)
- Electronic casing assembly
With a mix ratio of 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment.
Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.