3M™ Cubitron™ II Flap Disc 969F, 40+, T29, 4 in x 3/8"-24, 10 ea/Case

$8.78 / Each

SKU	7100104616
Legacy SKU	60440306094
UPC	00076308643850
Product Number	969F

3M Cubitron ll Flap Disc 969F is the ideal choice for medium to high-pressure applications like beveling, weld removal and edge deburring. By combining a durable polyester backing with 3M Precision-Shaped Grain, this long-lasting flap disc delivers a consistent, fast cut on a variety of metals while providing a smooth finish.

Ideal 3M flap disc for aggressive grinding applications like beveling, weld removal and edge deburring
Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
Durable polyester backing material stands up to high unit pressure applications
Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
Versatile flap disc is easy to use with a lower risk of gouging than fiber discs and bonded wheels
Great for applications where finish is important

Add to cart

Premium Deburring, Grinding and Finishing

For Right Angle Grinders

Long Lasting Performance

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0.294 lbs
Width	4 in
Length	4 in
Height	3/8 in
Diameter	4 in	101.6 mm
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	3.123 lb
Length	7.1248 in
Width	4.75 in
Height	5.1248 in

Color	Maroon
Maximum Speed	15,000 rpm

PRODUCT FAQ

What is the grit size of 3M™ Cubitron™ II Flap Disc 969F, 40+, T29, 4 in x 3/8"-24, 10 ea/Case?

The grit size of this flap disc is a coarse grade, rated at forty-plus (40+).
What type of backplate does it have?

This flap disc has a T29 configuration which means that it comes with a conical-shaped plastic backing that makes it easy to mount onto angle grinders.
How many discs are included in one case?

You will receive ten (10) individual discs inside one case of our Cubitron II Flap Discs.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7100104616 | 3M™ Cubitron™ II Flap Disc 969F

UPC 00076308643850 | 3M™ Cubitron™ II Flap Disc 969F

Product Number 969F | 3M™ Cubitron™ II Flap Disc 969F

Keeps Cutting After Other Discs Quit

3M™ Cubitron™ II Flap Disc 969F – powered by 3M Precision-Shaped grain and a tough polyester backing – is the highest-performing 3M flap disc for demanding applications like heavy grinding, edge deburring and beveling. It also features a grinding aid that helps it run cool to maintain cutting efficiency on heat-sensitive metals. All of these attributes make 3M™ Cubitron™ II Flap Disc 969F a good match for projects that require an equally durable and versatile abrasive disc.

Flap Disc Design

Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.

Powered by 3M Precision-Shaped Grain

3M™ Cubitron™ II Flap Disc 969F features proprietary 3M Precision-Shaped Grain – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously to expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.

Applications