through rough waters
3M™ Flap Wheel 747D, 80 X-weight, Type 83, 1-1/2 in x 1 in x 1/4 in, 10 ea/Case
$10.72 / Each
| SKU | 7100026492 |
|---|---|
| Legacy SKU | 60440262354 |
| UPC | 00051144807581 |
| Product Number | 747D |
3M Flap Wheel 747D was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.
- Ceramic aluminum oxide blend offers excellent cut rate and life for better performance
- X-weight cotton backing withstands aggressive sanding and grinding
- Resin bonding resists thermal and chemical deterioration for extended wheel life
- Abrasive flap design provides a soft and smooth cut on rounded or irregular surfaces
- Includes a grind-aid to provide cooler running on stainless-steel and other metals
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Center Hole Diameter | 1/4 in | 6.35 mm |
Shipping Dimensions |
|
| Weight | 0.99098 lb |
|---|---|
| Length | 7.12598 in |
| Width | 5.11811 in |
| Height | 5 in |
| Color | Orange |
|---|
PRODUCT FAQ
-
What is the abrasive material used in 3M™ Flap Wheel 747D, T83?
The 80 X-weight flap wheel features high-quality ceramic aluminum oxide abrasive grain that delivers a quick and effective cut.
-
What are the dimensions of this product?
The size of the product is 1-1/2 inches x 1 inch x 1/4 inch.
-
Is it sold per piece or in bulk?
This product comes in a pack of ten, which saves cost while meeting your grinding and finishing needs.
-
What kind of surface preparation work can I use the flap wheel on?
Our Flap Wheel works remarkably well for blending sharp corners; cleaning welds and removing flash; deburring parts; sanding and finishing wood, metals, plastics, fiberglass, rubber as well as other materials.
The 3M™ Flap Wheel 747D is a high-performance abrasive wheel that features a ceramic abrasive mix on each flap. This mix was created using a proprietary process that enhances the toughness and hardness of the grain. The ceramic abrasive mix is a blend of aluminum oxide and 3M ceramic grain, making it a harder and longer-lasting abrasive. It is perfect for light to moderate stock removal and can handle intense heat and stress applications. The ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability, making it an excellent choice for moderate stock removal and surface preparation.
High Quality ConstructionThe abrasive mix is attached to a flexible cotton backing using a resin bond that resists thermal and chemical deterioration during high-speed sanding. The bond is very hard, allowing for faster cuts and a higher cut rate. The wheel also includes a grinding aid for cooler running on stainless steel. Each flap uses an X-weight cotton backing, which provides a tough but flexible surface that bends to fit any workpiece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, ensuring that surfaces are sanded consistently throughout the life of the wheel.
Flap Wheel AdvantagesCoated abrasive flap wheels are the ideal choice for light grinding, blending, graining, and scale removal on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives and a load-resistant design. 3M™ flap wheels are available in both flange-mounted and spindle-mounted constructions with general-purpose aluminum oxide or high-performing 3M ceramic aluminum oxide blend abrasive grain.
Advantages of the 3M™ Flap Wheel 747D:- Long-lasting ceramic abrasive mix
- Flexible cotton backing with a hard resin bond
- Grinding aid for cooler running on stainless steel
- Self-cutting flaps for consistent sanding throughout the life of the wheel
- Load-resistant design for light grinding, blending, graining, and scale removal on a variety of metals
