Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

3M Xtract™ Interface Disc Pad 28323, 5 in x 1/2 in x 3/4 in 31 Holes, 10 ea/Case

3M™

$14.43 / Each

SKU 7100009701
Legacy SKU 60440236234
UPC 00051141283234
Product Number 28323

The 3M Interface Pad is a 1/2-inch thick, medium density foam pad that provides additional surface conformability when used with a 3M Hookit backup pad on a 3M Random Orbital Sander. The additional conformability helps when sanding critical surfaces with fine grade abrasives, after leveling and refining sanding steps are complete, but before final surface finishing steps.

  • Medium density foam provides additional flexibility on contours
  • Ideal for sanding curves, angles and contours
  • Applies effortlessly between Hookit™ discs and Hookit™ back-up pads for quick changeouts
  • May include Clean Sanding hole configuration to clear dust from the work surface, increasing disc life
  Add to cart
On it's way to you February 11   

Qty

Minimum Order 10 Items
Order Increment 10 Items
  Multiple Application Use
  High Quality Products
  Global Shipping
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 0.04 lbs
Width 6-1/2 in
Length 1/2 in
Height 6-1/2 in
Thickness 1/2 in 12.7 mm
Center Hole Diameter 3/4 in 19.05 mm
Shipping Dimensions
Weight 0.6001 lb
Length 6.88976 in
Width 6.88976 in
Height 5.86614 in
Color Gray
Maximum Speed 12,000 mps

PRODUCT FAQ

  1. What is the 3M Xtract Interface Disc Pad?

    The 3M Xtract™ Interface Disc Pad is a product designed to be used in conjunction with our abrasive discs. It features hole patterns that match dust extraction hole configurations, which helps reduce airborne dust particles when sanding.

  2. What size is the pad?

    The disc pad measures 5 inches by 1/2 inch by 3/4 inch.

  3. How many pads are included in each case of product?

    Each case contains ten pads for your convenience.

  4. Does the disc pad require any special tools or equipment to use effectively?

    This interface disc pad can work with standard power sanders, and does not require any specialized tools or attachments for use - just connect it as you would any other abrasive disc!

  5. . Will this interface pad work with all types of abrasives?

    . Yes! While we recommend using our own line of abrasives like Cubitron II and Trizact, this interface disk works well with virtually all brands of hook-and-loop backed paper.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Conformability Protects Your Tools and Your Work Surface

When sanding rounds and profiles, the 3M™ Interface Pad provides additional conformability to protect your tools and work surface. It is placed between the backup pad and the abrasive disc or sheet, and helps operators reach internal angles.

The Clean Sanding Option – No Alignment Required

Some interface pads are designed to work with the 3M Clean Sanding system to maximize dust extraction. These pads must be used with a 3M™ Clean Sanding Backup Pad on a self-generated or central vacuum tool. The 3M™ Clean Sanding dust-management system evacuates dust from the work surface better than 5 or 6-hole products, dramatically increasing disc life and maximizing cut-rate. The Clean Sanding system provides dust extraction from the air surrounding the tool, as well as directly from the work surface. This reduces loading of the disc and adds life to the abrasive. Additionally, reducing dust in the air improves working conditions.

The 3M™ Clean Sanding Interface Pad is available for use with 5 inch Clean Sanding Disc Pads and discs or 3x4" Clean Sanding Pads and sheets. Both feature a unique multi-hole pattern designed to maximize dust evacuation, extending the abrasive's life, improving results and keeping the air clean as well. For maximum dust extraction when using 3M™ Clean Sanding Interface Pads, align the holes in the interface pad with the holes in the back up pad, when installing the interface pad. The unique, multi-hole design of 3M™ Clean Sanding Abrasive sanding discs do not require alignment on the backup pad or interface pad, further saving you time and hassle.

The 3M™ Hookit™ System

The Hookit™ attachment system is integrated to make abrasive changes quick and easy, enabling repeated use and reducing material consumption.

3M Science Optimizes Industrial Abrasives

3M pays attention to every detail of the abrasive process, from discs to tools to all the accessories in between. 3M™ Interface Pads are an excellent example of how 3M uses science to continually improve abrasive operations and help businesses operate faster, better and more efficiently. The pads are engineered with quality foam construction, Hookit™ backing and the unique hole design on the Clean Sanding options.

Applications
Industries
Brochures, Catalogs & Data Sheets
  Add to cart