Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Rubber Sanding Drum 706436, 1-1/2 in x 2 in x 1/4 in, 10 ea/Case

Standard Abrasives™

$10.02 / Each

SKU 7010368739
Legacy SKU 66000051996
UPC 00051115375996
Product Number 706436

The Standard Abrasives Rubber Sanding Drum holds an abrasive band for contour work (band sold separately). Constructed from rubber, the drum expands at high speed for the closest possible fit with a band of the same size for controlled operation. This enables it to run smoothly over contoured surfaces and into hard-to-reach areas without skipping or jumping for a smooth, precise finish.

  • Rubber drum enables controlled expansion of a spiral band for proper balance and smooth running at high speeds (band sold separately)
  • Non-slip drum surface securely holds spiral band
  • Enables polishing, finishing and blending on contours when smooth running is essential
  • Pairs with coated abrasive bands or non-woven surface conditioning bands
  • Use same diameter drum and band
  • Range of sizes helps ensure an ideal match between drum size and part for optimal results
  Add to cart
On it's way to you February 19  

Qty

Minimum Order 1 Item
Order Increment 1 Item
  Multiple Application Use
  High Quality Product
  Global Shipping
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Diameter 1-1/2 in 38.1 mm
Shipping Dimensions
Weight 2.665 lb
Length 12.1248 in
Width 4.3748 in
Height 4.25 in
Maximum Speed 7,000 rpm

PRODUCT FAQ

  1. What is included in one case of the Standard Abrasives™ Rubber Sanding Drum 706436?

    One case of the product includes 10 individually packed sanding drums with dimensions of 1-1/2 inch x 2 inch x 1/4 inch.

  2. What kind of abrasive material is used on this sanding drum?

    The Standard Abrasives™ Rubber Sanding Drum uses aluminum oxide as its abrasive material.

  3. Can these rubber sanding drums fit a drill press chuck or only hand-held drills?

    Yes, these sanding drums are compatible with both hand-held drills and drill presses that have chucks capable of holding the drum's two-inch diameter shank size.

  4. How long does each drum last on average before needing to be changed out for a new one?

    The lifespan of each individual sandpaper spiral band depends upon numerous factors such as speed and pressure used during operation. As an estimate, if utilized correctly under appropriate conditions, each spiral should last approximately fifteen minutes to half an hour depending on application specifics like surface type or operator’s experience using them.

  5. . Are there any safety precautions I need to take when using these products?

    . When operating any machinery or power tools it is important to follow all manufacturer and industry recommended safety guidelines including proper PPE (Personal Protective Equipment), keeping loose clothing stowed away from equipment obstructions while keeping bystanders clear at all times so nobody gets hurt by flying debris or otherwise accidentally coming into contact with your work area during use.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Smooth, Balanced Application

When it comes to achieving balanced handling, using an abrasive belt may not always be the best solution. In such cases, the Standard Abrasives™ Rubber Sanding Drum, when fitted with a Standard Abrasives™ Spiral Band (sold separately), can be an excellent alternative. The spiral band can be a coated abrasive for polishing and blending, or a non-woven surface conditioning product for effective finishing. The Standard Abrasives™ Rubber Sanding Drum offers an even application on contours and hard-to-reach areas with a rotary tool.

Tips for Optimal Use

For optimal use, it is important for both the drum and the abrasive to have the same nominal diameter to prevent skipping and bumping. The spiral band stays in constant contact with the workpiece to swiftly rid the surface of little burrs, rather than deflecting or skidding over the substrate. The maximum allowable RPM for spiral bands is the same as the maximum RPM of the drum, provided the drum and band have the same nominal diameter. Typically, the rubber drum attaches to portable drills, die grinders, straight shaft and angle grinders. The great news is, the drum requires no extra tools for band changes.

Quality Standard Abrasives™ Solutions for Industrial Applications

For over 50 years, the Standard Abrasives brand has been supplying quality abrasives to the metalworking industry. Customers rely on the broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

Industries
Brochures, Catalogs & Data Sheets
  Add to cart