Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Multi-Finish Wheel 856892, 12 in x 2 in x 5 in 2S MED, 1 ea/Case

Standard Abrasives™

$229.96 / Each

SKU 7010367300
Legacy SKU 66000045717
UPC 00051115369711
Product Number 856892

Standard Abrasives Multi-Finish Wheel is a low density, durable wheel used primarily for applications requiring a linear scratch and final finish on surfaces where no edges or burrs are present.

  • Low density wheel covers more surface area when light pressure is applied
  • Silicon carbide mineral, available in a range of grade, cuts sharp for final finishing
  • Runs smooth for less operator fatigue
  • Non-metallic nylon fibers prevent workpiece contamination, including smears and blemishes
  • Open web conforms to workpiece, preventing undercutting and gouging
  Add to cart
On it's way to you February 26  

Qty

Minimum Order 1 Item
Order Increment 1 Item
  Multi-Functional
  Versatile Across Industries
  Easy To Use
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Center Hole Diameter 5 in 127.0 mm
Shipping Dimensions
Weight 3.875 lb
Length 12.3748 in
Width 12.3748 in
Height 3.75 in
Maximum Speed 3,000 rpm

PRODUCT FAQ

  1. What is the best use for Standard Abrasives™ Multi-Finish Wheel 856892, 12 in x 2 in x 5 in 2S MED, 1 ea/Case?

    The wheel works great on a range of surfaces including stainless steel and aluminum. It can also be effectively used on brass and bronze.

  2. Can this product be used with an angle grinder or straight buffer?

    Yes! This abrasive is designed to work with both types of machines to make polishing easier.

  3. How long does it typically last before needing replacement?

    The life span of this wheel varies depending on the frequency and intensity of its use. We do recommend keeping extra wheels on hand so you’re always prepared!

  4. Will using this wheel create any hazardous dust?

    No need to worry about dangerous debris- when our products are properly used they don’t generate excessive dust particles that might cause harm to workers or machinery

  5. ：Can I use water as a coolant/lubricant when using the finish wheel？

    ：Using water will only provide limited reduce heat build-up during operation but it’s ok since it won't damage your equipment. Although we do suggest using lubricants specially formulated for these purposes if possible!

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Low Density, High Performance

The Standard Abrasives™ Multi-Finish Wheel is engineered to be a low density wheel, allowing it to conform to the workpiece and leave a soft scratch pattern without significantly altering the part's geometry. During final finishing with this wheel, low pressure should be applied. Additionally, the larger contact patch of the low density wheel allows for greater contact with the workpiece.

Soft Scratch Patterns

The Standard Abrasives™ Multi-Finish Wheel is created by combining silicon carbide mineral and nonwoven nylon fibers with resin to form an open web. The sharp cutting mineral and low pressure result in a soft scratch pattern that is desired during final finishing. The mineral comes in fine (FIN), medium (MED), and coarse (CRS) grades. For a soft scratch pattern, a fine grade should be used, while a coarser grade is recommended for a rougher scratch pattern.

Benefits of Open Web Abrasives

The nonwoven fibers in the open web break down during use to reveal new mineral, providing a consistent scratch pattern throughout the life of the abrasive. Additionally, the uniform breakdown of the fibers prevents chunking or dusting. The nylon fibers are non-metallic, preventing contamination of metal and avoiding heat-induced smears and blemishes that can result from metal on metal.

The combination of buoyant, responsive nonwoven fibers and sharp-cutting silicon carbide mineral make this abrasive ideal for final finishing. It is effective for blending coated abrasive scratches or blending surfaces to match a #4 mil finish. Other applications include satin finishing on architectural hardware or grain finishes prior to anodizing.

Multiple Industry Applications

The Standard Abrasives™ Multi-Finish Wheel is designed to help users from various industries achieve the final finish they desire. It is suitable for use on door hardware, plumbing fixtures, aluminum extrusions, sanitary metal containers, and dairy equipment, among other workpieces.

Brochures, Catalogs & Data Sheets
  Add to cart