3M™ Microfinishing Film 5MIL Type UK Belt 272L, 37 in x 60 in 20 Micron, 5 ea/Case

$110.64 / Each

SKU	7010365037
Legacy SKU	60600144483
UPC	00051111695357
Product Number	272L

3M Microfinishing Film Belt 272L was designed to deliver close tolerance precision finishes on a versatile range of substrates from gelcoat and soft rubber to fiberglass and metals.

Durable 5 mil film backing won’t deflect when run, so it can stand up to contours
Micron graded aluminum oxide mineral cuts sharp but won’t gouge or mar the substrate
Features a closed coat construction for finish consistency
Excellent choice for applications requiring fine finishes
Available in a versatile range of grades, so operators can select the right grade for their application

Add to cart

Immense Durability

Can Be Used In Many Industries

Multi-Functional

Versatile Across Applications

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null

Shipping Dimensions
Weight	7.4384 lb
Length	40.3748 in
Width	8.3748 in
Height	11.8748 in

Color	Red

PRODUCT FAQ

What is the main benefit of using 3M™ Microfinishing Film 5MIL Type UK Belt?

The main benefit of using 3M™ Microfinishing Film 5MIL Type UK Belt is that it provides consistent, precise finishes on metal, composites and other surfaces.
Can I use this belt for wet sanding?

Yes! In fact, the film backing helps to ensure a uniform finish when used with water or coolant.
How long does each belt last before needing to be replaced?

That can depend on several factors like type of material being finished. However, our micro reproducible mineral abrasives help provide longer abrasive life compared to traditional technologies which may mean fewer replacements are needed.
Are there any safety precautions I should take when using these belts?

Always follow safe practices by wearing protective equipment such as goggles and gloves in addition to following instructions provided in technical data sheets and label directions for all products used along with these belts.-

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7010365037 | 3M™ Microfinishing Film 5MIL Type UK Belt 272L

UPC 00051111695357 | 3M™ Microfinishing Film 5MIL Type UK Belt 272L

Product Number 272L | 3M™ Microfinishing Film 5MIL Type UK Belt 272L

Aluminum Oxide Mineral

3M™ Microfinishing Film Belt 272L is a unique abrasive belt designed for sheet polishing, finishing, and flat finishing. The belt is made by anchoring aluminum oxide mineral to a polyester film backing with resin. Aluminum oxide mineral is a popular choice among industrial professionals due to its fast cut rate and long life. The mineral's hardness, strength, and low heat retention help the belt withstand the repeated wear that grinding and finishing often demand.

Water-Resistant Polyester Backing

The polyester film backing on 3M™ Microfinishing Film Belt 272L is water-resistant, allowing the belt to be run wet or dry. By applying a lubricant, like water, as the abrasive runs, operators may be able to wash away swarf and debris that tend to clog the abrasive or warp and discolor the substrate. The resin bond that fastens aluminum oxide to the backing helps the abrasive stay cool, because it breaks down gradually as the belt rotates.

Available in a Range of Grades

3M™ Microfinishing Film Belt 272L is available in a versatile range of grades, from 9 to 100 micron. Operators can select the right grade for their unique application. Higher grades, like 100 micron, are good for higher removal processes, while lower grades, like 9, are good for final, fine finishes. This film-backed belt enables operators to quickly achieve desired Ra (roughness average) and other surface finish parameters. These are some of the reasons why this belt is used across industries, from metalworking to woodworking.

Summary

3M™ Microfinishing Film Belt 272L is designed for sheet polishing, finishing, and flat finishing.
The belt is made by anchoring aluminum oxide mineral to a polyester film backing with resin.
The polyester film backing is water-resistant, allowing the belt to be run wet or dry.
3M™ Microfinishing Film Belt 272L is available in a versatile range of grades, from 9 to 100 micron.
This film-backed belt enables operators to quickly achieve desired Ra (roughness average) and other surface finish parameters.