3M™ Trizact™ Cloth Belt 237AA, A80 X-weight, 1 in x 18-15/16 in, Film-lok, Full-flex, 200 ea/Case

$5.27 / Each

SKU	7010361458
Legacy SKU	60440171605
UPC	00051125174268
Product Number	237AA

3M Trizact Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
Flexible backing for consistent finish over contours
Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications
For intermediate finishing and fine polishing prior to plating or buffing
Ideal for intermediate finishing and fine polishing prior to plating or buffing
Produces finer finishes than conventional electrostatically coated abrasives

Add to cart

High-Quality Cloth Belt Materials

Durable

Versatile

Multi-Functional

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null

Shipping Dimensions
Weight	5.97607 lb
Length	12.00787 in
Width	12.00787 in
Height	7.00787 in

Color	Gray

PRODUCT FAQ

What is the 3M™ Trizact™ Cloth Belt 237AA made of?

The 3M™ Trizact™ Cloth Belt 237AA is made up of a blend of aluminum oxide and ceramic abrasive grains on an X-weight cloth backing.
How big is it?

It comes in size, measuring about 1 inch by 18-15/16 inches.
How many belts are in one case?

A single case contains around two hundred (200) belts.
Q: Can this belt be used on any kind of grinder?

A : As long as your grinder can accommodate a one-inch wide belt, you shouldn't have any problem using the Trizact Cloth Belt with it.
Q:Is it possible to order just a few pieces from the case or do I have to buy them all at once?

A :You can purchase just a few pieces if that's what you need instead of getting an entire case all at once. In fact, we recommend ordering according to your needs so you don’t run out mid-project!

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7010361458 | 3M™ Trizact™ Cloth Belt 237AA

UPC 00051125174268 | 3M™ Trizact™ Cloth Belt 237AA

Product Number 237AA | 3M™ Trizact™ Cloth Belt 237AA

Built For Dimensioning and Scratch Refinement

The 3M™ Trizact™ Cloth Belt 237AA is designed to provide consistent finishes on hard metals such as carbon and stainless steel. The abrasive and resin structure is formulated to break down under medium pressure and keep fresh, sharp mineral cutting. The belt also features a grinding aid that helps prevent heat buildup, warping, and discoloration. The X-weight, durable cloth backing helps provide control, conformability, and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination.

Runs Smooth, Finishes Consistently

The belt uses a Film Media Splice, a strong secure bond joining the belt ends, consisting of a thin film-joining media that minimizes "chatter marks," ensures a smooth running belt, and consistent finishing results. Proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer when compared to conventional abrasive products.

Ideal for Robotic Finishing and Polishing

3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt. Robotic metal polishing demands the most consistent, refined cut and long abrasive life.

The Science of Flawless Finishes

3M™ Trizact™ belts start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. They can last up to five times longer than conventional belts and provide precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface of 3M™ Trizact™ abrasives ensure consistent performance and eliminate part to part variation.