through rough waters
Standard Abrasives™ Surface Conditioning FE Belt 885634, 4 in x 84 in MED, 5 ea/Case
$52.46 / Each
| SKU | 7010330864 |
|---|---|
| Legacy SKU | 66000041732 |
| UPC | 00051115365737 |
| Product Number | 885634 |
The Standard Abrasives Surface Conditioning FE Belt saves time preparing workpieces for final finishes and coatings by performing one-step prep work. A reliable choice for edgework, some of its best uses include deburring and blending. FE material is an outstanding performer for flats and edgework when high contact pressure and stock removal are required.
- High edge durability and flexibility
- Designed for blending and deburring on ferrous metals, stainless steel, and high nickel/chrome alloys
- Aluminum Oxide on FE material provides high initial and extended cut rate
- Most efficient on ferrous materials when high contact pressure and stock removal are required
- Open web responds to surface irregularities and minimizes gouging of the part
- Non-woven construction provides for long life, flexibility, heat-resistance and consistent cut rate
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null |
Shipping Dimensions |
|
| Weight | 6.97322 lb |
|---|---|
| Length | 20.3748 in |
| Width | 20.3748 in |
| Height | 4.75 in |
| Color | Maroon |
|---|
PRODUCT FAQ
-
What is the Standard Abrasives™ Surface Conditioning FE Belt 885634 used for?
The Standard Abrasives™ Surface Conditioning FE Belt 885634 is designed to be used on a variety of surfaces including metal, paint, and coatings. It is ideal for blending, finishing, and deburring applications.
-
How long can I expect the belt to last?
The lifespan of the Standard Abrasives™ Surface Conditioning FE Belt can vary depending on usage. However, these belts are made with high-quality materials that provide a consistent cut rate over their lifetime.
-
Are these belts easy to use?
Yes! These belts are simple to install and remove from your sander or grinder. They also have a non-woven surface that won't load up like conventional abrasives making them efficient tools in any shop or factory setting.
-
Can you tell me more about the grit level of this belt?
The Standard Abrasives™ Surface Conditioning FE Belt has Medium-grade silicon carbide abrasive with open web construction that helps resist loading while providing just enough aggressiveness in its cut to assist with lowered cycle times across an array of industrial tasks.
The Standard Abrasives™ Surface Conditioning FE Belt is designed to provide high initial and extended rates of cut, while maintaining edge durability. This belt is constructed of resin-reinforced, non-woven fiber, which is more compact than Buff & Blend products. It is aggressive yet minimizes under-cutting or gouging of the workpiece. The FE belt performs the best on edges within the Standard Abrasives™ line of surface conditioning belts.
FE Belt MaterialFE belts are made of a tough but flexible nylon mesh that fits any contoured surface. The FE material is designed with a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the belt and allows for extended use on ferrous materials or steel. This is the best surface conditioning material to use when high contact pressure and stock removal are required, and when loading is not a concern.
Outstanding Performance of Surface Conditioning MaterialSurface conditioning products have a non-woven construction in which fiber strands, resin, and abrasive mineral form a thick, open web or mesh. The fibers respond to contours and effectively remove unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow heat and swarf to escape, prolonging the performance of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life.
Aluminum Oxide for Ferrous Metals and CompositesThe fibers that make up this belt are overlaid with aluminum oxide abrasive. Aluminum oxide belts are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and is a good choice for applications on ferrous metals and composites. FE belts feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades of Very Fine (VFN), Medium (MED) and Coarse (CRS).
Recommended ApplicationsThe Surface Conditioning FE Belt comes in many different widths and lengths for use on pneumatic sanders, portable belt sanders, backstand equipment, and floor mounted/platen sanders. Its thick coating of resin makes it ideal for material removal where loading is not an issue. Choose this belt for use on ferrous metals, stainless steel, and high nickel/chrome alloys to perform deburring, blending, and creating a smooth transition from one surface profile to another.
Quality Standard Abrasives™ Solutions for Industrial ApplicationsThe Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. They offer a broad selection of high performance products including coated, bonded, and non-woven abrasive lines.
FE Belt Recommended Applications List:- Deburring: removing large and micro burrs, edge radiusing, removing die cast flashings
- Blending: removing mill marks, tool marks and mismatches; reducing uneven edges between adjoining surfaces; reorienting surface scratch patterns; creating a smooth transition from one surface profile to another