through rough waters
Standard Abrasives™ Surface Conditioning RC Belt 888040, 3 in x 132 in MED, 5 ea/Case
$56.00 / Each
| SKU | 7010330850 |
|---|---|
| Legacy SKU | 66000040080 |
| UPC | 00051115364082 |
| Product Number | 888040 |
The Standard Abrasives Surface Conditioning RC Belt saves time preparing workpieces for final finishes and coatings by performing one-step prep work. Constructed with enhanced edge durability and flexibility, combined with high initial and extended cut rate, this is a great all-around belt for deburring, blending, cleaning and finishing on composites and softer metals.
- High edge durability and flexibility
- Excellent starting point for finishing stainless steel to a #4 finish
- Designed for blending, coating removal, finishing, and light deburring
- Aluminum Oxide on RC material provides good initial and extended cut rate
- Best material for general use and average pressure usage
- Most efficient on flat surfaces
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null |
Shipping Dimensions |
|
| Weight | 7.47808 lb |
|---|---|
| Length | 20.3748 in |
| Width | 20.3748 in |
| Height | 4.75 in |
| Color | Maroon |
|---|
PRODUCT FAQ
-
What is the grit of 3M's Standard Abrasives™ Surface Conditioning RC Belt?
The grit of this belt is medium (MED).
-
What are the dimensions and quantity in a case for this product?
This product has dimensions of 3 inches x 132 inches, with five belts per case.
-
Is this abrasion-resistant to provide extended service life?
Yes, this surface conditioning belt provides consistent finishes and offers resistance to wear without sacrificing quality or cutting power.
-
Can I use it for deburring edges, cleaning metal surfaces or light grinding on a variety of metals efficiently?
Absolutely! It's designed for moderate to heavy stock removal, finishing and blending operations on soft carbon steels, stainless steel or aluminum parts efficiently.
-
Does 3M offer any specific tools that fit these belts to make abrasive-belt precision grinding easier, as we need greater control over our deburring application?
:Yes. You can choose from any of our compatible tools such as File Belt Sander Attachment Arm,Finger File Pneumatic Tool,Finger Sanding Pad,Nylon Brush T-C-5N,Large Diameter Wheel Rubber Replacement Hub etc., which will work great alongside these surface conditioning belts.
Featuring a more compact structure of non-woven fibers than Buff & Blend products, Standard Abrasives™ Surface Conditioning RC Belt is engineered to provide high initial and extended rates of cut, while maintaining edge durability. Constructed of resin-reinforced, non-woven fiber, the belt material resists loading and minimizes under-cutting or gouging of the work piece. Compared with Standard Abrasives GP surface conditioning products, RC material offers a faster cut and increased durability for edgework. It is a great choice for general use, delivering a solid mix of durability, flexibility, and cut rate.
FE Material for Additional Strength and DurabilityFE material has a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the belt and allows for extended use on ferrous metals where final finishing is important.
The Outstanding Performance of Surface Conditioning MaterialSurface conditioning products have a non-woven construction in which fiber strands, resin, and abrasive mineral form a thick, open web or mesh. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow heat and swarf to escape, prolonging the performance of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life.
Aluminum Oxide for Ferrous Metals and CompositesThe fibers that make up this belt are overlaid with aluminum oxide abrasive. Aluminum oxide belts are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and is a good choice for applications on ferrous metals and composites. RC belts feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades of Very Fine (VFN), Medium (MED) and Coarse (CRS).
Recommended ApplicationsStandard Abrasives™ Surface Conditioning FE Belt comes in many different widths and lengths for use on pneumatic sanders, portable belt sanders, backstand equipment, and floor mounted/platen sanders. Choose this belt for use on ferrous metals, softer metals such as aluminum, and composites for:
- Deburring: removing large and micro burrs, edge radiusing, removing die cast flashings
- Blending: removing mill marks, tool marks and mismatches, reducing uneven edges between adjoining surfaces, reorienting surface scratch patterns, creating a smooth transition from one surface profile to another
- Cleaning: removing coatings, gaskets and surface discolorations from welds or other surfaces
- Finishing: conditioning grind lines, reducing surface roughness, polishing welds prior to inspection, applying cosmetic grain finish
The Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. They offer a broad selection of high performance products including coated, bonded, and non-woven abrasive lines.