Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Buff and Blend HP Disc, 850808, 7 in x 1/2 in A VFN, 10/Pac, 100 ea/Case

Standard Abrasives™

$4.61 / Each

SKU 7010330822
Legacy SKU 66000035346
UPC 00051115359347
Product Number 850808

Made of non-woven material with added stiffness, the Standard Abrasives Buff and Blend HP Disc produces an aggressive cut and is designed for applications such as removal of burrs or tough contaminants.

  • Tough HP material is stiffer and more tear-resistant than GP material and is well-suited for edge deburring and metal removal
  • Aluminum Oxide cuts sharp, helps produce a consistent scratch pattern, and works well on ferrous and non-ferrous metals
  • Pliable open web removes burrs and surface contaminants without gouging the substrate
  • Open web is load resistant, limiting buildup of debris that can clog the abrasive center hole discs come in a range of medium to large sizes to meet many different project specifications
  • Red discs contain aluminum oxide, very fine (VFN) grade abrasive
  Add to cart
On it's way to you February 21  

Qty

Minimum Order 100 Items
Order Increment 100 Items
  Multi-Functional
  Versatile Across Industries
  Easy To Use
  Fantastic Price
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Center Hole Diameter 1/2 in 12.7 mm
Shipping Dimensions
Weight 9.98474 lb
Length 12.74961 in
Width 15.3748 in
Height 15.3748 in
Color Red
Thread Size Non Pertinent
Maximum Speed 3,000 rpm

PRODUCT FAQ

  1. What is the maximum speed for using Standard Abrasives™ Buff and Blend HP Disc, 850808, 7 in x 1/2 in A VFN?

    The recommended operating speed range for this product is between 2000 RPM to 4000 RPM. Hence, it's better to stay within this limit.

  2. Is there any difference between non-woven discs and buffing pads?

    Yes! Standard Abrasives™ Buff and Blend HP Discs are designed as a replacement of fiber abrasives while the buffing pads work differently from discs or sheets by applying polishing compounds on uneven surfaces by hand-operated machines. Buff and Blend HP disc have high strength fibers that provide hardwearing resistance during blending metals.

  3. Can I use water when grinding with these abrasive discs?

    It's not advised using Standard Abrasives™ Buff and Blend HP Disc under wet condition since its grain particles can be washed away; thus decreasing their grinding power even if their life cycle won't impact substantially. Therefore no moisture is recommended during operation.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Added Stiffness for Lightweight Deburring and other Moderate Applications

The Standard Abrasives™ Buff and Blend HP Disc efficiently performs light deburring and aggressive cleaning on a variety of metal substrates: ferrous and non-ferrous metals, aluminum, high nickel and stainless steel. The tough nylon web offers sustained performance and leaves a consistent finish on the workpiece, resulting in little to no rework. The very fine (VFN) grade abrasive contributes to a nice clean finish. This disc features aluminum oxide mineral, which cuts sharp and is friable, fragmenting under heat and pressure to reveal sharp cutting edges during use. Among the four Standard Abrasives™ Buff and Blend materials, HP material is moderately stiff, durable and aggressive, making it a good starting point for deburring applications. Its non-woven construction responds to contours and extrusions while minimizing gouging or marring of the part. If desired, discs may be ganged on a shaft to form a wheel.

Durable Disc Accommodates Edges and Extrusions

The HP Disc is a smart choice when you need to remove part lines from small castings, small burrs from threaded pipes, burrs from aluminum extrusions or die cast flashing, or heavy surface oxidation. Its durability results in a long service life, helping to reduce the need for replacements. Moreover, the sturdy material stands up to edges and extrusions, minimizing edge fraying and grain shedding. If greater durability is desired for heavier-duty applications such as edge deburring, you may upgrade to one of our Standard Abrasives™ Buff and Blend High Strength (HS) Discs. Quick Change discs are available separately.

The Many Benefits of Standard Abrasives™ Non-Woven Products

Standard Abrasives™ Buff and Blend non-woven products offer many benefits. Varying Buff and Blend materials help distinguish Buff and Blend products from each other, but all Buff and Blend products have an open web. The open web combines abrasive mineral and non-woven nylon fibers with a resin-reinforced bond. The resin bond securely anchors mineral to the fibers, making for a strong, durable abrasive.

  • Gaps between fibers allow swarf to escape, so the abrasive does not get clogged with debris.
  • Minimizing swarf and debris prolongs abrasive service life and keeps minerals cutting sharper for longer.
  • Nylon fibers won't splinter during grinding, offering a good alternative to steel wool.
  • Moreover, as the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral.

Standard Abrasives™ Buff and Blend products deliver a consistent cut and finish - part after part.

Brochures, Catalogs & Data Sheets
  Add to cart