SKU | 7010330364 |
---|---|
Legacy SKU | 66000047259 |
UPC | 00051115371257 |
Product Number | 859282 |
Standard Abrasives Metal Finishing Wheel is a dense and stiff convolute wheel designed to help you achieve a final finish on a variety of metals.
- Produces satin and antique finishes on a variety of metals
- Can be dressed to fit specific part geometry
- Rigid convolute wheel construction works well on flat surfaces and corners
- High cut rate requires low contact pressure
- Open web is load resistant, prolonging abrasive service life
Product Dimensions |
Imperial | Metric |
Weight | 0 NULL | |
---|---|---|
Width | 0 null | |
Length | 0 null | |
Height | 0 null | |
Diameter | 6 in | 152.4 mm |
Center Hole Diameter | 1 in | 25.4 mm |
Shipping Dimensions |
|
Weight | 2.73594 lb |
---|---|
Length | 6.3748 in |
Width | 6.3748 in |
Height | 4.6878 in |
Maximum Speed | 6,000 rpm |
---|
PRODUCT FAQ
-
What is the composition of 3M's Standard Abrasives™ Metal Finishing Wheel 859282?
Our Standard Abrasives™ Metal Finishing Wheel 859282 contains aluminum oxide and non-woven material.
-
What are the dimensions of this abrasive wheel?
The dimensions of our Standard Abrasives™ Metal Finishing Wheel 859282 are 6 inches in diameter, by 2 inches wide, with a thickness of one inch.
-
How many wheels come in each case?
Each case contains two wheels of our Standard Abrasives™ Metal Finishing Wheel 859282.
-
What type(s) of metals can this wheel be used on for finishing purposes?
Our Standard Abrasives™ Metal Finishing Wheel is suitable for use on various types of metal surfaces such as stainless steel, carbon steel, aluminum and other alloys.
Whether for technical requirements or aesthetic purposes, many industrial markets value a final finish on their workpieces. Standard Abrasives™ Metal Finishing Wheel is an excellent tool to help achieve the desired finishes. It is particularly useful for stainless steel fabricators and appliance and food equipment manufacturers, as it can help with production finishing of a variety of parts, such as door hardware, plumbing fixtures, aluminum extrusions, sanitary metal containers, and dairy equipment.
The Benefits of Aluminum OxideStandard Abrasives™ Metal Finishing Wheel is engineered by mixing aluminum oxide mineral and nonwoven nylon fibers with resin to create an open web. The mineral is often paired with ferrous metals and composites, as well as fiberglass and plastic. It cuts aggressively without gouging or marring the substrate, maintaining the original part geometry and reducing the need for rework. Medium grade aluminum oxide imparts decorative satin and antique finishes on stainless steel, brass, and aluminum.
Dense and DurableThe nonwoven nylon fibers in the open web break down while finishing, exposing new mineral for a consistent cut. Gaps between the fibers allow swarf to escape, so the web resists clogging with debris, prolonging abrasive service life. The open web on the Metal Finishing Wheel is densely and compactly wound around a fiberglass core. The dense and durable construction helps the abrasive withstand greater contact pressures and speed variations. Additionally, the wheel edge can also be dressed to match part geometry if required. Combining aluminum oxide mineral with a dense convolute wheel construction makes for a tough, durable cutting wheel that requires minimal pressure. Moreover, the wheel's density helps it stay firm and not deflect or yield to the substrate, so it performs well on flat surfaces and edges.
AltogetherStandard Abrasives™ Metal Finishing Wheel is a durable and long-lasting finishing wheel. It has the strength and toughness required to stand up to edges and extrusions but still leaves a soft, fine finish in its wake.