Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

3M™ Flap Disc Adapter Nut 88765, 5/8"-11 internal, 5 ea/Case

3M™

$10.49 / Pair

SKU 7010309134
Legacy SKU 60980034817
UPC 00051144887651
Product Number 88765

3M Flap Disc Adapter Nuts are a small but important accessory that helps attach 3M Flap Discs securely to typical 4-1/2" right angle grinder spindles. The nuts will conveniently thread onto 5/8-11 spindles and feature a 7/8" diameter raised shoulder for mounting and centering T27 and T29 flap discs.

  • 3M™ Flap Disc Adapter Nut securely attaches 3M™ Flap Discs (sold separately) to right angle grinders
  • Designed to fit flap discs that measure 41/2" in diameter with a 7/8" center hole
  • 3M™ Flap Disc Adapter Nuts feature 5/8-11 thread size, for use on grinders with 5/8-11 threaded spindles
  • Accommodates T27 and T29 flap discs
  Add to cart
On it's way to you December 31   

Qty

Minimum Order 5 Pairs
Order Increment 5 Pairs
  Multiple Application Use
  High Quality Product
  Global Shipping
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Shipping Dimensions
Weight 0.6 lb
Length 4.29134 in
Width 4.29134 in
Height 2.99213 in

PRODUCT FAQ

  1. What is the 3M™ Flap Disc Adapter Nut 88765 used for?

    The 3M™ Flap Disc Adapter Nut is designed to securely hold flap discs on angle grinders with a 5/8"-11 internal thread.

  2. How many adapter nuts are in a case?

    There are five pairs of adapter nuts included in each case, for a total of ten.

  3. Can this nut be used with any brand of flap disc?

    Yes, the 3M™ Flap Disc Adapter Nut is universal, which means it can be used with any brand or type of flap disc that has a compatible size and attachment method.

  4. Will this adapter nut fit my angle grinder?

    To ensure compatibility, make sure your angle grinder has a standard 5/8"-11 external thread. If so, the 3M™ Flap Disc Adapter Nut should work perfectly.

  5. Is there anything I should know about using this adapter nut safely?

    Always follow all safety precautions when working with power tools and abrasive products. Make sure the flap disc is properly seated on the adapter nut before use, and do not exceed maximum RPM rating listed on both the tool and accessory.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
The Most of Your Flap Disc

3M™ Flap Disc Adapter Nuts are designed to secure flap discs to a right angle tool, allowing operators to focus on their work without worrying about attachments. This adapter nut is specifically designed for use with 4.5-inch flap discs that have a 7/8-inch center hole. 3M offers a range of T27 and T29 Flap Discs that meet these specifications, including:

  • 3M™ Flap Disc 546D
  • 3M™ Flap Disc 577F
  • 3M™ Flap Disc 566A
  • 3M™ Cubitron™ II Flap Disc 967A

Overall, 3M™ Flap Discs provide an unbeatable system for grinding and blending in a single step. The flap construction gradually wears away, exposing fresh mineral to extend disc life and maintain consistent cut rates. Flap discs are commonly used for weld grinding, blending, deburring, rust removal, surface preparation, and edge grinding on all types of metals. 3M's flap discs are made with alumina zirconia and precision-shaped ceramic grain. The mineral and grade of the disc determine which application it is best suited for. Some discs are ideal for high-pressure projects, such as beveling and deburring, while others are better suited for low-pressure projects like blending and light cleaning. Regardless of the application, operators can trust that with the help of 3M™ Flap Disc Adapter Nut, they can make the most of their disc.

Industries
Brochures, Catalogs & Data Sheets
  Add to cart