through rough waters
Standard Abrasives™ Surface Conditioning FE Belt 885007, 2 in x 48 in CRS, 10 ea/Case
$19.38 / Each
| SKU | 7010301225 |
|---|---|
| Legacy SKU | 66000040577 |
| UPC | 00051115364570 |
| Product Number | 885007 |
The Standard Abrasives Surface Conditioning FE Belt saves time preparing workpieces for final finishes and coatings by performing one-step prep work. A reliable choice for edgework, some of its best uses include deburring and blending. FE material is an outstanding performer for flats and edgework when high contact pressure and stock removal are required.
- High edge durability and flexibility
- Designed for blending and deburring on ferrous metals, stainless steel, and high nickel/chrome alloys
- Aluminum Oxide on FE material provides high initial and extended cut rate
- Most efficient on ferrous materials when high contact pressure and stock removal are required
- Open web responds to surface irregularities and minimizes gouging of the part
- Non-woven construction provides for long life, flexibility, heat-resistance and consistent cut rate
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null |
Shipping Dimensions |
|
| Weight | 4.59002 lb |
|---|---|
| Length | 15.3937 in |
| Width | 15.3937 in |
| Height | 6.73228 in |
| Color | Brown |
|---|
PRODUCT FAQ
-
What is the Standard Abrasives™ Surface Conditioning FE Belt 885007 used for?
The Standard Abrasives™ Surface Conditioning FE Belt 885007 is commonly used for surface preparation and finishing applications.
-
What is the size of a Standard Abrasives™ Surface Conditioning FE Belt 885007, 2 in x 48 in CRS belt?
The size of each belt is 2 inches by 48 inches.
-
How many belts are included per case of the Standard Abrasives™ Surface Conditioning FE Belt 885007, 2 in x 48 in CRS?
Each case contains ten (10) belts to ensure that you have plenty on hand.
-
Can I use this type of belt with any machine or sander brand?
Yes! Our abrasives work with most popular sanders out there. You should always make sure your equipment has enough torque to properly power the abrasive, though!
-
Can I really count on these pads lasting long enough to get my job done?
. Yes - they're very reliable! These belts keep cutting sharp as they wear down so you can expect consistent performance throughout their life. We recommend storing them nicely between uses for best results.
The Standard Abrasives™ Surface Conditioning FE Belt is designed to provide high initial and extended rates of cut, while maintaining edge durability. This belt is engineered with a more compact structure of non-woven fibers than Buff & Blend products. It is constructed of resin-reinforced, non-woven fiber, making it aggressive yet minimizing under-cutting or gouging of the workpiece. The FE belt performs the best on edges within the Standard Abrasives™ line of surface conditioning belts.
FE Belt MaterialFE belts are made of a tough but flexible nylon mesh that fits any contoured surface. The FE material is designed with a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the belt and allows for extended use on ferrous materials or steel. This is the best surface conditioning material to use when high contact pressure and stock removal are required, and when loading is not a concern.
Outstanding Performance of Surface Conditioning MaterialSurface conditioning products have a non-woven construction in which fiber strands, resin, and abrasive mineral form a thick, open web or mesh. The fibers respond to contours and effectively remove unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow heat and swarf to escape, prolonging the performance of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life.
Aluminum Oxide for Ferrous Metals and CompositesThe fibers that make up this belt are overlaid with aluminum oxide abrasive. Aluminum oxide belts are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and is a good choice for applications on ferrous metals and composites. FE belts feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades of Very Fine (VFN), Medium (MED) and Coarse (CRS).
Recommended ApplicationsThe Surface Conditioning FE Belt comes in many different widths and lengths for use on pneumatic sanders, portable belt sanders, backstand equipment, and floor mounted/platen sanders. Its thick coating of resin makes it ideal for material removal where loading is not an issue. Choose this belt for use on ferrous metals, stainless steel, and high nickel/chrome alloys to perform deburring, blending, and creating a smooth transition from one surface profile to another.
Quality Standard Abrasives™ Solutions for Industrial ApplicationsThe Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. They offer a broad selection of high performance products including coated, bonded, and non-woven abrasive lines.
Disclaimer:This product description is for informational purposes only. Always read and follow the product label for proper use and safety information.