through rough waters
3M™ Thermally Conductive Acrylic Interface Pad 5589H-15, 220 mm x 20 mx1.5 mm, 20 Sheets/Case
$17.00 / Sheet
| SKU | 7010293858 |
|---|---|
| Legacy SKU | JT940010229 |
| UPC | 04549395746286 |
| Catalog Number | 5589H-15 |
| Product Number | 5589H-15 |
3M Thermally Conductive Acrylic Interface Pad 5589H is an acrylic elastomer based interface pad. It has high thermal conductivity, good electrical insulation properties and is ideally suited for applications that require non silicone properties.
- Good softness and conformability to non-flat surfaces
- Excellent compressive stress relaxation
- Non-silicone acrylic elastomer
- Good dielectric performance
- Good surface tack leads to low thermal resistance at surface
- Thickness : 1.0 mm, 1.5 mm
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Thickness | 60 mil | 1.5 mm |
Shipping Dimensions |
|
| Weight | 7.27525 lb |
|---|---|
| Length | 2.75591 in |
| Width | 11.41732 in |
| Height | 15.74803 in |
PRODUCT FAQ
-
What is 3M™ Thermally Conductive Acrylic Interface Pad 5589H-15?
It is a pad that offers excellent thermal conductivity and electrical insulation.
-
What are the dimensions of this product?
The size of each sheet is 220 mm x 20 m x1.5 mm, and it comes in a case of 20 sheets.
-
What makes this interface pad unique compared to other pads on the market?
This interface pad from 3M provides superior heat dissipation over traditional gap fillers or thermally conductive adhesives. Its design reduces contact resistance resulting in lower interfacial thermal resistance between the electronic device components.
-
How can I use this product for my specific needs?
These pads can be customized for your project as it easy to cut,trimmed,molded or die-cut into desired shapes for fitting complex designs
-
. Is it safe to handle products like these?
. Yes! Safety instructions information sheets are provided with all orders on how safely handle our products including potential hazards associated with them avoiding mishandle during usage such as improper handling,storage,temparture,oxygen levels ensuring its maximum performance and minimizing accidents while using it
3M™ Thermally Conductive Acrylic Interface Pad 5589H has a soft pad that conforms to uneven substrates, providing excellent wettability to fill gaps for improved thermal performance. The thin, firm, low-tack layer provides easy handling for pre-assembly and die-cutting. This pad provides robust thermal management for applications in a variety of market segments, such as consumer electronics, automotive, LED lighting, medical devices, communication infrastructure, and aerospace & defense.
Our family of 3M™ Thermally Conductive Acrylic Interface Pads provide low-outgassing and high-performance solutions compared to silicone. These acrylic pads have no siloxane VOC or oil bleeding, which are associated with silicone products and can often cause device failure. They are lightweight, making them ideal for applications with finer spacing requirements and a small footprint. 3M™ Thermally Conductive Acrylic Interface Pads have good electrical insulation properties to protect against electrical interference and device breakdown.
Recommended Applications:
- Heat transfer between PCB and heat sink
- Decrease of compression stress to electronic parts by thermal pad softness
- Gap filling in electronic devices
- Chip on film (COF) heat dissipation
- Power electronic component thermal management
Examples:
- LED displays
- Electric vehicle (EV) batteries
- Wireless charging units
- Satellite navigation
- Sensors
- Process control equipment
- Test & measurement devices