Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Buff and Blend AP Disc, 870710, 6 in x 1/2 in A MED, 10/Pac, 100 ea/Case

Standard Abrasives™

$7.12 / Each

SKU 7000122061
Legacy SKU 66000035098
UPC 00051115359095
Product Number 870710

Standard Abrasives Buff and Blend AP Disc is an equally tough and pliable abrasive designed for medium duty cleaning, edge deburring and antique finishing on a variety of metals, including ferrous alloys.

  • Open web is flexible and pliable, so it will not gouge the substrate and sustain part geometry
  • Aluminum oxide mineral is friable and sharp, revealing fresh, sharp cutting edges for a consistent scratch
  • May be run with a lubricant to help eliminate swarf and potential for smearing the substrate
  • Available in very fine (VFN, red) and medium (MED, tan) grades to accommodate project needs
  • Open web is load resistant, so abrasive will not get clogged with debris, contributing to longer service life
  Add to cart
On it's way to you December 31   

Qty

Minimum Order 10 Items
Order Increment 10 Items
  Multi-Functional
  Versatile Across Industries
  Easy To Use
  Fantastic Price
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Center Hole Diameter 1/2 in 12.7 mm
Shipping Dimensions
Weight 6.99968 lb
Length 14.37008 in
Width 14.37008 in
Height 6.73228 in
Color Tan
Thread Size Non Pertinent
Maximum Speed 3,600 rpm

PRODUCT FAQ

  1. What is the Standard Abrasives™ Buff and Blend AP Disc used for?

    The Standard Abrasives™ Buff and Blend AP Disc is an all-purpose disc that provides a fine finish on metals, composites, woods, plastics, and painted surfaces.

  2. What size are the discs?

    The discs are 6 inches in diameter and 1/2 inch thick.

  3. How many discs come in each case of Standard Abrasives™ Buff and Blend AP Discs?

    Each case contains 100 inner packs with ten discs per pack so there's a total of 1000 pieces!

  4. . Why should I choose the Standard Abrasives™ Buff and Blend AP Disc over other similar products available in the market?

    . We take pride in developing high-quality abrasive solutions that help customers achieve their surface preparation goals efficiently while providing optimal performance at a competitive price point!

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Recommended Applications

Standard Abrasives™ Buff and Blend AP Disc strikes a balance between toughness and pliability. AP material is the thinnest Buff and Blend material, which enhances the disc's flexibility and ability to conform to the substrate. Yet, the high density of AP material creates an aggressive disc that is more tear resistant than Buff and Blend GP. Use this disc for medium-duty cleaning applications on parts with close tolerances; remove unwanted layers of paint, corrosion, sealants, adhesive and coatings.

This disc is made with aluminum oxide mineral, which cuts sharp but is still friable – fragmenting under heat and pressure to reveal sharp cutting edges. The abrasive is available in medium (MED, tan) and very fine (VFN, red) grades, so you can select the best grade for your application. Typically, very fine grades deliver a soft scratch pattern and a medium grade delivers an aggressive scratch pattern.

The Many Benefits of Open Web Abrasives

Standard Abrasives™ Buff and Blend products offer many benefits. Different Buff and Blend materials help distinguish Buff and Blend products from each other, but all Buff and Blend products have open web. Open web combines abrasive mineral and nonwoven nylon fibers with a resin-reinforced bond. The resin bond securely anchors mineral to the fibers, making for a strong, durable abrasive. The spongy, open web is flexible, responsive and conforms to irregular surfaces, so you can tackle ridges and contours without gouging or marring the substrate, reducing waste and the need for rework.

Gaps between fibers allow swarf to escape, so the abrasive does not get clogged with debris. Minimizing swarf and debris prolongs abrasive service life and keeps minerals cutting sharper for longer. Nylon fibers won't splinter during grinding, offering a good alternative to steel wool. Moreover, as the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface. Standard Abrasives™ Buff and Blend products deliver a consistent cut and finish – part after part.

Brochures, Catalogs & Data Sheets
  Add to cart