Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Rubber Sanding Drum 704431, 1-1/2 in x 1 in x 1/4 in, 10 ea/Case

Standard Abrasives™

$4.96 / Each

SKU 7000121767
Legacy SKU 66000004870
UPC 00051115328862
Product Number 704431

The Standard Abrasives Rubber Sanding Drum holds an abrasive band for contour work (band sold separately). Constructed from rubber, the drum expands at high speed for the closest possible fit with a band of the same size for controlled operation. This enables it to run smoothly over contoured surfaces and into hard-to-reach areas without skipping or jumping for a smooth, precise finish.

  • Rubber drum enables controlled expansion of a spiral band for proper balance and smooth running at high speeds (band sold separately)
  • Non-slip drum surface securely holds spiral band
  • Enables polishing, finishing and blending on contours when smooth running is essential
  • Pairs with coated abrasive bands or non-woven surface conditioning bands
  • Use same diameter drum and band
  • Range of sizes helps ensure an ideal match between drum size and part for optimal results
  Add to cart
On it's way to you December 31   

Qty

Minimum Order 10 Items
Order Increment 10 Items
  Multiple Application Use
  High Quality Product
  Global Shipping
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 0.17505 lbs
Width 1-1/2 in
Length 1/4 in
Height 1 in
Diameter 1-1/2 in 38.1 mm
Shipping Dimensions
Weight 2.06507 lb
Length 12.12598 in
Width 4.37008 in
Height 4.25197 in
Maximum Speed 14,000 rpm

PRODUCT FAQ

  1. What is the Standard Abrasives Rubber Sanding Drum 704431 used for?

    The Standard Abrasives Rubber Sanding Drum 704431 is designed for use with sanding sleeves or bands to provide a cushioned surface that conforms well on contours, edges and curves.

  2. How many rubber sanding drums come in a case?

    There are ten (10) rubber sanding drums included in each case of the Standard Abrasives Rubber Sanding Drum 704431.

  3. Can I use this sanding drum on my drill press?

    Yes, the Standard Abrasives Rubber Sanding Drum 704431 can be used in any drill press that accommodates its size (1-1/2” x 1” x 1/4”) which should be listed as part of your drill press specifications.

  4. Will these sanding drums work on all types of wood and metal materials?

    Yes, since the Standard Abrasives Rubber Sanding Drum uses aluminum oxide abrasive material it works effectively with all types of metals and woods including hardwoods, softwoods, ferrous metals like steel & iron alloys along with stainless steel and non-metallic materials like plastics

  5. . Are these particulary noisy or messy when being used?

    . Noisy equipment can make working conditions uncomfortable however you’d barely hear anything when using Standard abrasives™ products because we thought about comfort even among other features. They are also built to minimize dust emission during usage no matter how much material removal is involved otherwise known as clean slate!

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Smooth, Balanced Application

When it comes to achieving balanced handling, using an abrasive belt may not always be the best solution. In such cases, the Standard Abrasives™ Rubber Sanding Drum, when fitted with a Standard Abrasives™ Spiral Band (sold separately), can be an excellent alternative. The spiral band can be a coated abrasive for polishing and blending, or a non-woven surface conditioning product for effective finishing. The Standard Abrasives™ Rubber Sanding Drum offers an even application on contours and hard-to-reach areas with a rotary tool.

Tips for Optimal Use

For optimal use, it is important for both the drum and the abrasive to have the same nominal diameter to prevent skipping and bumping. The spiral band stays in constant contact with the workpiece to swiftly rid the surface of little burrs, rather than deflecting or skidding over the substrate. The maximum allowable RPM for spiral bands is the same as the maximum RPM of the drum, provided the drum and band have the same nominal diameter. Typically, the rubber drum attaches to portable drills, die grinders, straight shaft and angle grinders. The great news is, the drum requires no extra tools for band changes.

Quality Standard Abrasives™ Solutions for Industrial Applications

For over 50 years, the Standard Abrasives brand has been supplying quality abrasives to the metalworking industry. Customers rely on the broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

Industries
Brochures, Catalogs & Data Sheets
  Add to cart